762779
30
Zoom out
Zoom in
Previous page
1/45
Next page
30/EN
To cancel the delay function:
When you press the Start / Pause / Cancel
key for 3 seconds while the delay function
is active, the delay process shall be
cancelled.
Starting of the program
Press the Start / Pause / Cancel key to start
your machine after selecting the program
and additional functions.
Machine softens the water as per the
hardness of the mains water. The
washing period may differ due to the
water softening process. Moreover,
program period may also change while
the program is being executed as a
result of the room temperature, mains
water temperature and the amount of
dishes.
Care to avoid opening of the door
while the machine is being operated.
If you need to open the door, stop the
machine by pressing the Start / Pause
/ Cancel key. Then open the door of
the machine. Be careful as steam
may come out when you open the
door of the machine. Press the Start /
Pause / Cancel key again after closing
the machine door. Program shall be
resumed.
To ensure that the water remaining
on the dishes and inside the machine
is completely drained and that the
water softener is removed after rinsing
operation, your machine resumes
operation at drying cycle after keeping
silent for a while.
Monitoring of Program
You may monitor the current program step
of the program you have selected from the
program step monitoring indicators on the
control panel.
If the drying indicator is illuminated,
machine shall perform drying silently
for approximately 30 to 60 minutes.
After this period, the drying indicator
is turned off and End indicator shall be
illuminated. The End light is illuminated
when the washing program you have
selected is complete.
Cancelling the program
1. Press the Start / Pause / Cancel key
for 3 seconds to cancel the program.
2. Release the key when Washing and
Drying indicators start to flash. The
water inside the machine shall be
drained within 45 seconds. Program
shall be cancelled when the Washing
and Drying indicators are turned off
and End indicator is illuminated. Then,
you may select a new program and
start it.
Detergent or rinse aid may remain
inside the machine and/or the dishes
being washed as per the step of the
program you have cancelled.
When the Program Selection Knob is
brought to “Off” position, the washing
program is ended and machine
becomes ready for selection of
program again. Water and detergent
may remain inside the machine if the
washing is ended in such a way.
Low Salt Warning indicator
Check the low salt warning indicator to
determine if the softening salt available in
your machine is adequate. You shall add
salt to the salt compartment when the low
salt warning indicator starts to illuminate.
Setting of water hardness level is
described in the Quick Guide.
Low Rinse Aid Warning indicator
Check the low rinse aid warning indicator to
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DVS05C20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DVS05C20 in the language / languages: English as an attachment in your email.

The manual is 8,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DVS05C20

BEKO DVS05C20 User Manual - German - 41 pages

BEKO DVS05C20 User Manual - Dutch - 40 pages

BEKO DVS05C20 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info