582398
32
Zoom out
Zoom in
Previous page
1/52
Next page
32
EN
2 Installation
Refer to the nearest Authorized Service Agent for
installation of the product. To make the product
ready for use, make sure that the electricity and
water drainage system are appropriate before
calling the Authorized Service Agent. If they are
not, call a qualified technician and plumber to have
any necessary arrangements carried out.
C
Preparation of the product's location as well
as the electrical and waste water installations
is under customer's responsibility.
B
Installation and electrical connections of the
product must be carried out by the Authorized
Service Agent. Manufacturer shall not be
held liable for damages that may arise from
procedures carried out by unauthorized
persons.
A
Prior to installation, visually check if the
product has any defects on it. If so, do not
have it installed. Damaged products cause
risks for your safety.
A
Let your dryer wait for 12 hours before
starting to use it.
Appropriate installation location
Install the product on a stable and level
surface.
Dryer is heavy. Do not move it by yourself.
Operate your product in a well ventilated,
dust-free environment.
Do not block the air ducts in front of and
under the product with materials such as long
pile rugs, wooden blocks and bands.
Do not install the product behind a door with
a lock, sliding door or a hinged door which
can strike the product.
Once the product is installed, it should stay at
the same place where its connections have
been made. When installing the product,
make sure that the rear wall of it does not
touch anywhere (tap, socket, etc.). Also pay
attention to select an installation location
which you will not be required to change
afterwards.
Place the product at least 1.5 cm away from
the edges of other furniture.
B
Do not place the product on the power cable.
Removing the transportation safety
assembly
A
Remove the transportation safety assembly
before using the product for the first time.
1. Open the loading door.
2. There is a nylon bag inside the drum that
contains a piece of styrofoam. Hold it from its
section marked with XX XX.
3. Pull the nylon towards yourself and remove
the transportation safety assembly.
A
Make sure that no part of the transportation
safety assembly remains inside the drum.
Under counter installation
This product can be installed under a counter
if the height of the counter is sufficient.
A
While using undercounter dryer, it should
never be operated without undercounter
installation part.
Dryer Depth 60 cm 54 cm
Stock number
of under-bench
installation part
2979700100 2973600100
Leave at least 3 cm of space around the
sides and the rear wall of the product when
installing it under a counter or in a cupboard.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DPU 8305 XEL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DPU 8305 XEL in the language / languages: English, German as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info