528155
30
Zoom out
Zoom in
Previous page
1/43
Next page
29
EN
auxiliary functions and time as
described in the sections above.
3. Press Start / Pause / Cancel key.
Countdown will resume or restart.
Canceling the Time Delay function
1. Press and hold Start / Pause /
Cancel key for 3 seconds.
2. Release the key when the Start /
Pause indicator starts flashing. For
a couple of minutes the machine
will fulfill the necessary operations
required to cancel the function. Once
the Time Delay function is cancelled,
"00:00" will appear on the Remaining
Time indicator.
C You can select and start a new
programme following the cancellation
of Time Delay function.
C Time Delay function can not be set
after the programme starts.
Starting the programme
To start your machine after selecting
the programme and auxiliary functions,
press Start / Pause / Cancel key.
Once the programme starts to run,
Remaining Time indicator displays
the estimated time to the end of the
programme. Start / Pause indicator
starts lighting continuously.
C Your machine performs water
softening depending on the hardness
level of the supply water. Remaining
time displayed towards the end in
some programmes can be different
from the time indicated at the
beginning due to this process. The
total time can also change while the
programme is running depending on
the ambient temperature where your
machine is installed, temperature of
the supply water and amount of the
dishes.
C Pay attention not to open the door
of the machine when it is running.
Stop the machine by pressing Start
/ Pause / Cancel key if you have to
open the door. Then, open the door
of the machine. There may be a
rush of vapour when you open the
door of your machine; be careful.
Close the door of your machine
and press Start / Pause / Cancel
key again. Programme will resume
running.
Child Lock
You can prevent other people
from interrupting and changing the
programme cycle and delay time while
the machine is running.
1. Press and hold the Programme
Selection key and the Half Load
key simultaneously for three
seconds to activate the child lock.
Child Lock indicator will appear
on the display. Repeat the same
procedure to disable the Child
Lock.
C Child lock prevents the selected
programme or functions from being
changed and disables the Start /
Pause / Cancel key.
C Child Lock does not lock the door
of the machine.
Programme follow-up
You can follow-up the washing step
in which the current programme is in
from the Programme Steps Follow-up
indicators on the display.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DFN 6840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DFN 6840 in the language / languages: English as an attachment in your email.

The manual is 10,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DFN 6840

BEKO DFN 6840 User Manual - Dutch - 43 pages

BEKO DFN 6840 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info