528155
29
Zoom out
Zoom in
Previous page
1/43
Next page
28
EN
For the steam function to be available,
you need to have sufficient amount of
salt in the dishwasher for salt filling.
If you need to open the dishwasher's
door when the SteamGloss is active,
do this very slowly and take care as the
emitting steam is at high temperature.
Preparing the machine
1. Open the tap.
2. Plug in to the socket.
3. Open the door of the dishwasher.
4. Place the dishes in accordance
with the instructions in the user
manual.
5. Make sure that the upper and lower
impellers rotate freely.
6. Put adequate amount of detergent
into the detergent dispenser.
7. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
8. Close the door of the dishwasher.
Programme selection
1. Press On / Off key to turn on your
machine.
2. Refer to "Table of Programme Data
and Average Consumption Values"
to select a washing programme
suitable for your dishes.
3. Press Programme Selection key
repeatedly until the number of
the selected programme appears
on the Programme indicator
. Programme number
will increase by one each time you
press the key.
C Number of the programmes on the
machine may change depending
on the model you have purchased.
Adding an auxiliary function
to the programme
Depending on your needs, you can
add Half Load (1/2), Tablet Detergent,
SteamGloss and Time Delay functions
to the programme you have selected.
Press the key of the function you
wish to add. Indicator of the relevant
function will appear on the display.
Setting Time Delay function
If an economical electricity tariff is
applied in your region, you can use
the Time Delay function to wash your
dishes during appropriate hours.
1. Press the Time Delay function
key after selecting the washing
programme and other auxiliary
functions. Time Delay indicator ( )
will start flashing on the display.
2. Press Time Delay key to set the
time you wish. Time will increase
with increments of 30 minutes up
to 24 hours every time you press
the key.
3. Press Start / Pause / Cancel key.
Delay time will start countdown.
Time Delay indicator ( ) and
Start / Pause indicator will light
continuously. Remaining time
will appear on the Time Delay
indicator. Programme will start
automatically when the countdown
is over.
Changing the settings during Time
Delay
While the Time Delay function is
activated, you can make changes
in the washing programme, other
auxiliary functions or the delay time.
1. Press Start / Pause / Cancel key
to switch the machine into Pause
mode. Countdown will stop.
2. Select the new programme,
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DFN 6840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DFN 6840 in the language / languages: English as an attachment in your email.

The manual is 10,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DFN 6840

BEKO DFN 6840 User Manual - Dutch - 43 pages

BEKO DFN 6840 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info