550084
29
Zoom out
Zoom in
Previous page
1/41
Next page
28
EN
YM_program_
takibi
the estimated time to the end of the
programme. Start / Pause indicator
starts lighting continuously.
C Your machine performs water
softening depending on the hardness
level of the supply water. Remaining
time displayed towards the end in
some programmes can be different
from the time indicated at the
beginning due to this process. The
total time can also change while the
programme is running depending on
the ambient temperature where your
machine is installed, temperature of
the supply water and amount of the
dishes.
C Pay attention not to open the door
of the machine when it is running.
Stop the machine by pressing Start
/ Pause / Cancel key if you have to
open the door. Then, open the door
of the machine. There may be a rush
of vapour when you open the door
of your machine; be careful. Close
the door of your machine and press
Start / Pause / Cancel key again.
Programme will resume running.
Child Lock
You can prevent other people
from interrupting and changing the
programme cycle and delay time while
the machine is running.
1. Press and hold the Programme
Selection key and the Half Load key
simultaneously for three seconds to
activate the child lock. Child Lock
indicator will appear on the display.
Repeat the same procedure to
disable the Child Lock.
C Child lock prevents the selected
programme or functions from being
changed and disables the Start /
Pause / Cancel key.
C Child Lock does not lock the door
of the machine.
Programme follow-up
You can follow-up the washing step
in which the current programme is in
from the Programme Steps Follow-up
indicators on the display.
a Washing Step indicator
b Rinsing Step indicator
c Drying Step indicator
d End of Programme indicator
Indicators for Washing, Rinsing and
Drying will light respectively on the
display while the selected programme
is running. Only the End of Programme
indicator lights up when the
programme is over. “00:00” appears on
Remaining Time indicator.
Canceling a programme
1. Press and hold Start / Pause /
Cancel key for 3 seconds while the
programme is running.
2. Release the key when the Start /
Pause indicator starts flashing.
For a couple of minutes the
machine will fulfill the necessary
operations required to cancel the
programme. Once the Time Delay
function is cancelled, "00:00" will
appear on the Remaining Time
indicator.


29


Need help? Post your question in this forum.

Forumrules
1

Forum

beko-dfn-6833-s

Reset search

  • How can I change hardness setting in DFN 6833 S model? Submitted on 1-4-2020 at 15:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DFN 6833 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DFN 6833 S in the language / languages: English as an attachment in your email.

The manual is 9,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info