550084
27
Zoom out
Zoom in
Previous page
1/41
Next page
26
EN
Keys
On / Off key
It is used to turn on or off the machine.
In On position, the machine switches
on with the last programme in use. In
Of position, indicators on the display
will turn off.
If the Half Load, Tablet Detergent,
Child Lock and Time Delay functions
were selected in the previous
programme used, these functions will
remain active when the machine is
turned off and on again. If you want to
disable these functions after turning the
machine off and on again, you must
press the relevant keys again.
Start / Pause / Cancel key
It is used to start, pause or cancel the
selected programme or function.
To press the Start / Pause / Cancel
key, wait for two seconds after you turn
on the machine by pressing the On
/ Off key. An image will be displayed
within this time.
Programme Selection key
It is used to choose the washing
programme you selected in the "Table
of Programme Data and Average
Consumption Values".
Half Load key
It is used to operate the machine
without loading it completely.
1. Load your dishes in the machine as
you like.
2. Press the On / Off key.
3. Select the desired programme and
press the Half Load key. Half Load
( ) indicator will appear on the
display.
4. Press Start / Pause / Cancel key to
start the programme.
C With the Half Load function you
can save both water and power
while using the lower and upper
baskets of the machine.
Tablet Detergent key
This function provides better drying
performance with the multi-purpose
detergents such as 2in1, 3in1, 4in1,
5in1, all in one, etc., depending on the
hardness level of the supply water. Look
at the “Table of Programme Data and
Average Consumption Values” to see
which programmes the Tablet Detergent
function can be used with.
C Tablet Detergent Indicator lights
when the Tablet Detergent function
is selected.
Time Delay key
It is used to select the Time Delay
function. You can delay the start of the
selected programme up to 24 hours with
increments of 30 minutes thanks to the
Time Delay function.
Express key
This option allows you to shorten the
selected programme; the dishwasher
then uses higher water pressure and
consumes less energy and water.
Preparing the machine
1. Open the tap.
2. Plug in to the socket.
3. Open the door of the dishwasher.
4. Place the dishes in accordance with
the instructions in the user manual.
5. Make sure that the upper and lower
impellers rotate freely.
6. Put adequate amount of detergent
into the detergent dispenser.
7. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
8. Close the door of the dishwasher.
27


Need help? Post your question in this forum.

Forumrules
1

Forum

beko-dfn-6833-s

Reset search

  • How can I change hardness setting in DFN 6833 S model? Submitted on 1-4-2020 at 15:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DFN 6833 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DFN 6833 S in the language / languages: English as an attachment in your email.

The manual is 9,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info