528065
37
Zoom out
Zoom in
Previous page
1/44
Next page
37
EN
Changing the programme after the
programme has started
You can use this feature to dry your laundry in a
different program after your machine has started
to run.
For example;
Press and hold the “Start/Pause/Cancel” button
for about 3 seconds to “Cancel” the programme
in order to select “Extra Dry” programme instead
of “Iron Dry” programme. Select the “Extra Dry”
program by rotating the program knob. Press “Start/
Pause/Cancel” button to start the program.
C If you select a new programme by turning
the programme selection knob while your
machine is running, then the current program
is cancelled and new programme information is
displayed.
Adding/removing laundry in standby
mode
In order to add or take out laundry after the start-up
of the programme;
1. Press the “Start/Pause/Cancel” button to switch
the machine to “Pause” mode. Drying process
will stop.
2. Open the door at Pause position and close it
again after adding or taking out laundry.
3. Press “Start/Pause/Cancel” button to start the
program.
C Any laundry added after the drying process was
started may cause the already dried clothes in
the machine intermingle with wet clothes and
the result will be wet laundry after the drying
process is over.
CLaundry may be added or taken out as much
as desired during a drying process, but as this
process will interrupt drying continuously, it
will extend the program duration and increase
energy consumption.
Therefore, it is recommended to add laundry
before the drying programme has started.
C If you select a new programme by turning the
programme selection knob while your machine
is in standby, then the current program is
cancelled and new programme information is
displayed.
Child-proof lock
There is a child-proof lock to prevent any
programme interruption due to the pressing of
button while the programme is running. The loading
door and all button except the “On/Off button on
the panel are deactivated when the child-proof lock
is active.
In order to activate the child-proof lock, press on
the “audio warning” and “anti-creasing” buttons
simultaneously for 3 seconds.
To start a new programme after the programme is
over or to interrupt the programme, the child-proof
lock should be deactivated. Press the same buttons
for 3 sec. again to deactivate the child-proof lock.
Lock symbol will appear on the screen when the
child-proof lock is activated.
C Child-proof lock will also be deactivated when
the machine is restarted by pressing the on/off
button.
When the child-proof lock is activated:
Display icons will not change even if the position
of programme selection knob is changed while
the machine is running or in halt.
If the child-proof lock is deactivated after
changing the position of the programme
selection knob while your machine is running,
your machine stops and new programme
information is displayed
Ending the programme through canceling
A new program can be selected and started after
“Program cancel” is activated in order to change
the drying program.
To cancel any selected programme:
Press “Start/Pause/Cancel” button for about 3
seconds. “Lint filter cleaning” and “Water tank”
warning symbols light up and “End” label appears
on the screen as a reminder at the end of this
period.
A As the inside of the machine will be excessively
hot when you cancel the program while the
machine is running, activate the ventilation
program to cool it down.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DCU 7330 XB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DCU 7330 XB in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DCU 7330 XB

BEKO DCU 7330 XB User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info