528065
36
Zoom out
Zoom in
Previous page
1/44
Next page
36
EN
Door open
Dryer door open symbol lights up.
Time delay
With the “Time delay” function you can delay the
programme start up to 24 hours.
1. Open the loading door and put the laundry in.
2. Set the drying programme and spin speed, and if
required, select the auxiliary functions.
3. Press “Time delaying” buttons “+” and “-” to set
the desired time delay. The time delay symbol
will flash.
4. Press “Start/Pause/Cancel” button. Then the
time delay starts to count down. The Time delay
symbol lights up. Start symbol lights up.
The “:” in the middle of the displayed time delay will
start flashing.
More laundry may be loaded or taken out during
the time delay period. At the end of the time delay
countdown process, time delay symbol fades,
drying process starts and the programme duration
is displayed. The time on the display is the total of
normal drying time and delay time.
Time delay is started by pressing the start/pause/
cancel button in the exemplary figure.
Changing the delay time
If you want to change the time during the
countdown:
1. Press “Start/Pause/Cancel” button for 3 seconds
to cancel the programme. Time delay function
must be set again for the required time.
2. Press Time delay buttons “+” or “-” to set the
desired time delay.
3. Press “Start/Pause/Cancel” button. The Time
delay symbol lights up. Pause symbol fades.
Start symbol lights up.
4. The “:” in the middle of the displayed time delay
will start flashing.
Canceling the time delay
If you want to cancel the time delay countdown and
start the programme immediately:
1. Press “Start/Pause/Cancel” button for 3 seconds
to cancel the programme.
2. Then, press “Start/Pause/Cancel” button to start
the desired programme.
Starting the programme
1. Press “Start/Pause/Cancel” button to start the
programme.
2. “Start/Pause” symbol will light up to indicate
that the programme has started and “:” symbol
between the remaining time will continue
flashing.
Progress of programme
Drying
Iron
Wardrobe
(Extra)
Ventilation
Anti-
creasing
The progress of a running programme is shown
through a number of symbols on the screen.
At the beginning of each programme step, the
relevant symbol in the series of symbols will light up
and thus, all symbols will remain lit up at the end of
the programme. The symbol that is lit up at the far
right of the series of symbols indicates the step that
is being carried out.
“Drying”:
- Lights up in all programmes apart from drying and
ventilation.
“Iron Dry”:
- Starts to illuminate when the drying degree reaches
“iron dry step and remains illuminated until the next
step.
“Cupboard Dry”:
Starts to illuminate when the drying degree reaches
“wardrobe dry” step, and remains illuminated until
the next step.
“Extra Dry”:
Starts to illuminate when the drying degree reach to
“wardrobe dry extra” step.
“Ventilation”:
- Illuminates when the programme ends.
C Anti-creasing icon will light up at the end of the
programme if anti-creasing function is active.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DCU 7330 XB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DCU 7330 XB in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DCU 7330 XB

BEKO DCU 7330 XB User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info