757705
24
Zoom out
Zoom in
Previous page
1/32
Next page
24 / EN Dryer / User Manual
Canceling the end duration function
If you want to cancel the end duration setting
countdown and start the Programme right
away:
1. Cancel the Programme by pressing the
On/O button. Turn on the drying ma-
chine again by pressing the On/O but-
ton. When your drying machine turns
on for the rst time, it turns on with the
declaration (cotton wardrobe dryness)
Programme.
2. Select the Programme you desire using
the Programme Selection knob.
3. Start the Programme by pressing the
Start / Pause button.
6.11 Starting the Programme
Start the Programme by pressing the Start /
Pause button.
Start/Pause led and the Drying led light up,
indicating the Programme started. The “:” sign
in the middle of the remaining duration starts
to blink.
6.12 Child Lock
The machine features a child lock which pre-
vents the machine Programme ow from be-
ing aected when buttons are pressed during
operation.
When the Child Lock is active, all buttons ex-
cept for the On/O button are deactivated.
To activate the child lock, press the Sound
Notication button and End Duration button
simultaneously for 3 seconds.
Te child lock should be deactivated to be able
to start a new Programme after the current
Programme ends or to be able to interfere
with the current Programme. Keep the same
buttons pressed for 3 seconds again to deac-
tivate the child lock.
CThe lock led on the screen
lights up when the Child Lock is
activated.
CChild Lock deactivates when the
machine is turned off and on
again using the On/Off button.
A warning sound is heard when any button
is pressed (except for On/O button) or the
Programme Selection knob is turned while
the child lock is active.
6.13 Changing the Programme
after it is started
After the machine starts running, you can
change the Programme you selected to dry
your laundry with a dierent Programme.
1. For example, to select Extra Dry
Programme instead of the Iron Dryness,
stop the Programme by pressing the
Start / Pause button.
2. Turn the Programme Selection knob to
select the Extra Dry Programme.
3. Start the Programme by pressing the
Start / Pause button.
Adding and removing laundry in
stand-by mode
If you want to add or remove laundry after
the drying Programme starts:
1. Press the Start/Pause button to take the
machine into Stand-by mode. Drying op-
eration stops.
2. Open the loading door, add or remove
laundry and close the loading door.
3. Start the Programme by pressing the
Start / Pause button.
CThe laundry adding made after
the drying operation started may
cause the dried laundry inside
the machine to mix with the wet
laundry and the laundry to remain
damp after the operation ends..
CLaundry adding and removing can
be repeated as much as desired
during drying operation.
But this process would
continuously interrupt the drying
operation, and so would cause the
Programme duration to lengthen
and increase energy consumption.
Thus, it is recommended to add
laundry before the Programme
starts.
Operating the product
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DCB 93166 R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DCB 93166 R in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info