757705

BEKO DCB 93166 R Manual

23
Zoom out
Zoom in
Previous page
1/32
Next page
Dryer / User Manual 23 / EN
EN
Programs Capacity (kg) Spin speed in washing
machine (rpm) Approximate amount
of remaining humidity Drying time (minutes)
Cottons / Coloreds
AExtra dry 9 1000 % 60 159
ACupboard dry 9 1000 % 60 149
AIron dry 9 1000 % 60 112
Shirts 15 min. 0.5 1200 % 60 15
Jeans 4 1200 %50 80
Sport 4 1000 %60 92
Delicates 2 600 %40 40
BabyProtect 3 1000 % 60 70
Synthetics
BCupboard dry 4.5 800 % 40 58
BIron dry 4.5 800 % 40 50
Energy consumption values
Programs Capacity (kg) Spin speed in washing
machine (rpm) Approximate amount
of remaining humidity Energy consumption
value kWh
Cottons linen Ready to wear* 9 1000 % 60 5,12
Cottons Ready to iron 9 1000 % 60 4,1
Synthetics Ready to wear 4.5 800 % 40 1,9
Power consumption of the off-mode for the standart cotton programme at full load, PO (W) 0,5
Power consumption of the left-on mode for the standart cotton programme at full load, PL (W) 1,0
Operating the product
6.8 Auxiliary functions
Sound warning cancel
Drying machine makes sound warnings when
the Programme is completed. If you don’t
want sound notications, press the “Sound
Notication” button.
When you press the sound notication but-
ton it lights up, and Programme does not
make sound notications when completed.
CYou can select this function
before or after the Programme
starts.
6.9 Warning symbols
CWarning symbols may vary
according to the specifications of
your machine.
Fiber filter cleaning
When the Programme is completed, a warn-
ing led lights up, which indicates that the
lter has to be cleaned.
CIf the filter cleaning led blinks, see
the „Troubleshooting“ chapter.
Water tank
When the Programme is completed, a warn-
ing led lights up, which indicates that the
water tank must be emptied.
If the water tank lls up while the Programme
is running, warning led starts blinking and
the machine goes into stand-by. In that
case empty the water in the water tank and
start the Programme by pressing the Start /
Pause button. Warning led turns o and the
Programme resumes.
Loading door open
Start/Pause led blinks when the loading door
of the drying machine is open.
6.10 End duration
You can delay the end duration of the
Programme for up to 24 hours with the end
duration function.
1. Open the loading door and place your
laundry.
2. Select the drying Programme.
3. Press the end duration selection button
and set the delay duration you want.
End duration led lights up. (End dura-
tion moves continuously when you keep
pressing the button).
4. Press the Start / Pause button. End dura-
tion countdown begins. The “:” sign in
the middle of the displayed delay dura-
tion blinks.
CYou can add or remove laundry
for the duration of the end
duration. The duration displayed
on the screen is the sum of the
normal drying duration and the
end duration. At the end of the
countdown the end duration led
turns off, drying beings and drying
led lights up.
Changing the end duration
If you want to change the duration during the
countdown:
1. Cancel the Programme by pressing the
On/O button. Turn on the drying ma-
chine again by pressing the On/O but-
ton. When your drying machine turns
on for the rst time, it turns on with the
declaration (cotton wardrobe dryness)
Programme.
2. Select the Programme you desire using
the Programme Selection knob.
3. Repeat the end duration operation for
the duration you want.
4. Start the Programme by pressing the
Start / Pause button.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DCB 93166 R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DCB 93166 R in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info