816874
29
Zoom out
Zoom in
Previous page
1/96
Next page
EN / 29
2. With "Wireless Network O." field en-
abled, tap theRemove HomeWhiz” field
by turning the control knob to the right /
left.
3. The symbol “Delete the homewhiz pair-
ing?” is displayed on the screen. Delete
the pairing by tapping “Delete”.
5.4 Using the Meat Probe
General information and warnings
The oven shall be set to a specific oper-
ating function and temperature in order
to use the meat probe.
Meat probe feature is available in func-
tions where the meat probe symbol is lit
continuously.
If you have set the oven timer for a spe-
cific baking period before using the meat
probe, this period is cancelled automatic-
ally when the meat probe is installed.
You cannot use the racks above the meat
probe connector while cooking with a
meat probe.
Clean the meat probe with a wet cloth
and then dry it with a dry cloth after each
operation.
If 75C is not displayed on functions
where the meat probe is activated, en-
sure that the connector is firmly installed
to its seat.
If the sensor tip of the meat probe is
used without putting it inside the meat,
the sensor tip detect the temperature in-
side the oven and terminates cooking
when the set temperature is reached.
However, if the meat probe is exposed to
250 °C or above, the sensor is rendered
useless.
The operating temperature may be at
least 30 °C higher than the meat probe
temperature. Example: If the meat probe
temperature is set to 70 °C, the operating
temperature shall be set to 100 °C min-
imum.
The core temperature of the meat (the
coldest point) shall be at least 63°C in
terms of food safety.
The core temperature of the coldest
point of poultry meat shall be at least
74°C in terms of food safety, and the
core temperature shall be 85°C for well-
done meat.
Reference table for cooking range of red
meat:
Cooking Level Core temperature of the
meat* (°C)
Blue 55-59
Rare 60-62
Medium rare 63-70
Medium 71-76
Well-done 77-81
Overcooked ≥ 82
1. Turn the oven on by touching the key.
2. Slide the slot cover (4) on the side wall
of the oven upwards, and insert the
meat probe connector (2) to the meat
probe slot (1).
1 Meat probe slot
2 Meat probe connector
3 Meat probe sensor tip
4 Meat probe slot cover
3. When the meat probe is attached to the
product, the first operating function that
the meat probe can be used is displayed
on the function display. If you want to
cook in a different operating function,
turn the oven control knob to the right/
left. (In the picture, Statics operating
function has been shown.)
EN
DE
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO BBIM13500XPSW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO BBIM13500XPSW in the language / languages: English, German as an attachment in your email.

The manual is 5.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info