817038
33
Zoom out
Zoom in
Previous page
1/48
Next page
EN / 33
General warnings
Hot surfaces cause burns!
Do not touch the product during
self-cleaning and keep children away
from the product. Wait at least 30
minutes before removing the
residue.
Before using the pyrolysis function, re-
move all accessories, the telescopic shelf
and the side shelves (if any). If not re-
moved, the accessories and side wire
shelves will be damaged.
If your product has a pyro proof accessory
(resistant to high temperature self-clean-
ing), you do not need to remove these ac-
cessories from the oven. Whether your ac-
cessories are pyro-proof or not is specified
in the accessories section. If not specified,
your accessories are not resistant to high
temperatures. It must be removed from
the oven before cleaning to avoid damage.
Do not clean the door seal. The glass fiber
seal is very delicate and easily damaged. If
the door seal is damaged, replace it with a
new one from an authorized service.
To start the pyrolysis function:
a. Remove all accessories inside the oven.
In the models with wire shelves, remem-
ber to remove the wire shelf.
b. Before starting the cleaning, clean the
outer surfaces of the oven and the food
residues inside the oven with soapy cloth.
c. Select the “pyrolysis” (Pyrolysis) function.
ðThe “P2:00” flashes on the display.
If your appliance is equipped with
the Eco pyrolysis function, the
“Pro” message is displayed on the
display for 2 seconds first, and then
the P2:00 message starts to flash.
If the “Pro” and then the “ECO”
messages are not shown on the dis-
play, your appliance is not equipped
with the Eco pyrolysis function.
d. Turn the temperature knob to the highest
"max" (maximum) temperature.
e. When the pyrolysis function starts,
“P2:00” lights up and starts counting
down. The pyrolysis time (2 hours) is
shown on the display. This time is un-
changeable.
f. When the oven reaches a certain temper-
ature after the pyrolysis process starts,
the symbol appears on the timer dis-
play and the oven door cannot be
opened. Do not force the handle to un-
lock the door until the cleaning process is
finished and the lock symbol disappears
from the display.
g. When the cleaning process is finished,
"End" appears on the display.
h. After "End" appears on the display, turn
the function and temperature knobs to 0
(off) position to end the process.
i. When the symbol disappears on the
display, remove the remaining deposits
with vinegar water.
j. Touch any key to stop the audible warn-
ing.
After the pyrolysis function is com-
pleted, the door lock will be active
until the oven cools to the appropri-
ate temperature. If you want to cook
at this time, "H” will appear on the
display and cooking will not be pos-
sible.
Self cleaning function with high temper-
ature – Eco pyrolysis (It varies depend-
ing on the product model. It may not be
available on your product.)
üIf your oven is not very dirty, we recom-
mend using the "Pyrolysis - economy
mode" function. "Pyrolysis - economy
mode" function takes less time than the
Pyrolysis" function. If the oven is very
dirty, the "Pyrolysis - economy mode"
function may not be sufficient. In this
case, clean it by the "Pyrolysis" function.
a. Remove all accessories inside the oven.
In the models with wire shelves, remem-
ber to remove the wire shelf.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO BBIE22300XFP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO BBIE22300XFP in the language / languages: English as an attachment in your email.

The manual is 3.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info