634034
44
Zoom out
Zoom in
Previous page
1/103
Next page
- C 44 -
Short Seam Automat 2211-5 Working InstructionsBeisler Automated Sewing Equipment
C.4
Operation and shut-down
C.4.1 Working with the machine
Factory setting
The program control of the machine is programmed at the
factory with a sewing program with three different seams.
Factory settings
The machine comes with a factory-installed standard pro-
gram M 01 with three seams (01, 02, 03):
Seam 01: Clipping and crimping over of the left slash
selvage with subsequent sewing of the slash selvage
to the left trousers component.
Seam 02: Sewing the slash selvage to the right trou-
sers component.
Seam 03: Test seam that is restricted to two functions:
• Clamp movement from the insertion station to the
sewing head,
• Starting/ending the complete sewing process.
The test seam is used for checking the clamp trans-
port and the sewing process when the machine is set
up.
The standard program M 02 works with the two seams (11
and 12).
Seam 11: Controls the procedure for sewing the side
pocket to the right trousers component.
Seam 12: Controls the procedure for sewing the side
pocket to the left trousers component.
The standard program M 03 works with the two seams (19
and 20).
Seam 19: Controls the procedure for sewing the
right slash selvage to the right trousers compo-
nent at ladies' trousers.
Seam 20: Controls the procedure for sewing the
left slash selvage to the lefttrousers component at
ladies' trousers.
C.4.2 Machine shut-down
When the machine is to be shut down, it must be discon-
nected from all supply sources.
Disconnecting the machine from the power supply
system:
1. Turn machine off using main switch. Move switch to
position 0.
2. Remove power plug from socket and protect it from
accidental reconnection.
Disconnecting the machine from the compressed air
supply system:
1. Shut off on-site compressed air.
2. Remove compressed air hose plug from terminal unit.
NOTE - Dust-proof protection!
If the machine is to be shut down for an extended pe-
riod of time, it should be covered with a plastic tarpau-
lin.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beisler 2211-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beisler 2211-5 in the language / languages: English as an attachment in your email.

The manual is 8,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beisler 2211-5

Beisler 2211-5 User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info