668715

Behringer Xenyx Q802USB Manual

13
Zoom out
Zoom in
Previous page
1/18
Next page
24 25XENYX Q1202USB/Q1002USB/Q802USB/Q502USB Quick Start Guide
XENYX Q1202USB/Q1002USB/Q802USB/Q502USB Level
S etting
(EN)
Step 3: Level Setting
(ES)
Paso 3: Level Setting
(FR) Etape 3 : Level
Setting
(DE)
Schritt 3: Level
Setting
(PT) Passo 3: Level
Setting
(EN) To correctly set the gains of the channels,
rst set the LEVEL controls of the input channels
to their center positions (0 dB). Then use the GAIN
controls to increase the input amplication until
signal peaks show 0 dB on the level meter.
When recording to digital recorders, therecorder’s
peak meter should not go into overload.
Whileanalog recorders can be overloaded to
some extent, creating only a certain amount of
distortion (whichis common and often desirable),
digital recorders distort quickly when overloaded.
Inaddition, digital distortion is not only undesirable,
but also renders your recording completely useless.
The peak meters of your XENYX display the level
virtually independent of frequency. A recording level
of 0 dB is recommended for all signal types.
(ES) Para ajustar el nivel debe posicionar el regulador
LEVEL de los canales de entrada en la posición central
(0 dB) y aumentar mediante el regulador GAIN la
amplicación de entrada a 0 dB.
En la grabación con grabadores digitales,
losmedidores punta del grabador no deben
superar los 0 dB. Esto se debe a que, al contrario
que en la grabación analógica, ya las más
pequeñas sobrealimentaciones (que también
surgen de forma muy repentina) conducen a
desagradables distorsiones digitales. Losmedidores
punta de su XENYX muestran el nivel más o
menos independientemente de la frecuencia.
Serecomienda un nivel de grabación de 0 dB para
todos los tipos de señal.
(FR) Reglage : Pour régler le niveau des
signaux, placez la commande de niveau LEVEL
de chaque canal en position neutre 0 dB et
ajustez l’amplication d’entrée sur 0 dB via le
potentiomètreGAIN.
Pour l’enregistrement en numérique, l’acheur
de crêtes de votre enregistreur ne doit pas excéder
0 dB. En eet, contrairement aux magnétos
analogiques, les enregistreurs numériques
génèrent des distorsions très désagréables
dès le moindre dépassement, même minime,
dumaximumnumérique. Les indicateurs de
crêtes de votre XENYX achent le niveau de
façon quasiment indé-pendante de la fréquence.
Nousvous conseillons un niveau d’enregistrement de
0 dB quel que soit lesignal.
(DE) Aussteuerung: Zum Einpegeln sollten Sie den
LEVEL-Regler der Eingangskanäle in Mittelstellung
(0 dB) bringen und mit dem GAIN-Regler die
Eingangsverstärkung auf 0 dB anheben.
Bei der Aufnahme mit Digitalrekordern
sollten die Peak-Meter des Rekorders 0 dB
nicht übersteigen. Das hat den Grund, dass im
Gegensatz zur Analogaufnahme bereits kleinste
Übersteuerungen (die auch sehr plötzlich auftreten)
zu unangenehmen, digitalen Verzerrungen führen.
DiePeak-Meter Ihres XENYX zeigen den Pegel
nahezu frequenzunabhängig an. Empfehlenswert ist
ein Aufnahmepegel von 0 dB für alle Signalarten.
(PT) Modulação: Para a regulação do nível deverá
colocar o regulador LEVEL dos canais de entrada
na posição central (0 dB) e com o regulador GAIN
aumentar a amplicação de entrada para 0 dB.
Aquando da gravação com gravadores digitais,
os medidores de peak do gravador não
devem ultrapassar os 0 dB. O motivo é que,
contrariamente à gravação analógica, as mais
ínmas sobremodulações (que também surgem
muito repentinamente) podem originar distorções
digitais desagradáveis. Os medidores do peak
do seu XENYX indicam o nível de forma mais ou
menos independente da frequência. Recomenda-se
um nível de gravação de 0 dB para todos os tipos
desinais.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer Xenyx Q802USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer Xenyx Q802USB in the language / languages: Dutch as an attachment in your email.

The manual is 4,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info