660465
6
Zoom out
Zoom in
Previous page
1/12
Next page
6 XENYX 1002B User Manual
3. Controls and Connectors
3.1 Front panel
(1)
(2)
(10)
(11)
(12)
(13)
(14)
(8)
(6)
(17) (18)
(19)
(22)
(24)
(25)
(26)
(27)
(23)
(20)
(16) (21)(15)(5)(4)(7)(3)
(9)
(1) MIC – Plug a microphone into this input using an XLR cable.
(2) LINE IN – Plug a line-level source into this jack using a ¼" TS or TRS cable.
(3) INS(ERT) – Plug an external dynamic processor into this jack using a TRS to
dual TS cable. You may also use the INSERT jack as a pre-EQ/pre-fader send
by plugging in a ¼" TS cable part way to the rst click.
(4) STEREO LINE IN – Plug in a stereo source using two ¼" TS cables, or a single
line-level source using the left input jack only.
(5) GAIN LINE – Adjusts STEREO LINE IN sensitivity, also known as “gain setting.
(6) GAIN MIC – Adjusts MIC input sensitivity, also known as “gain setting.
(7) CLIP – Lights when preamp begins to overload.
(8) PAN/BAL – Adjusts the left-to-right positioning of the channel in the
stereo eld.
(9) HIGH – Adjusts frequencies above 10 kHz by ± 15 dB.
(10) MID – Adjusts frequencies peaking at 700 Hz by ± 15 dB.
(11) LOW – Adjusts frequencies below 50 Hz by ± 15 dB.
(12) MON – Adjusts the amount of signal sent to the MON SEND jack. This signal
is sent pre-fader.
(13) FX – Adjusts the amount of signal sent to the FX SEND jack. This signal is sent
post-fader.
(14) CHANNEL FADER – Adjusts the channel volume in the main mix.
(15) 2-TRACK OUTPUT – Connect to the inputs of recording device using
RCA cables.
(16) 2-TRACK INPUT – Connect to outputs of CD, tape or MP3 player using RCA or
¼" cables.
(17) PHONES – Connect a pair of headphones with a ¼" TRS plug.
(18) MAIN OUTPUT – Connect to the inputs of a power amp or powered speakers
using ¼" TS cables.
(19) FX SEND – Connect to the input of an external eects device using a
¼" TS cable.
(20) MON SEND – Connect to the input of a powered monitor or monitor power
amp using a ¼" TS cable.
(21) VU CLIP – Lights when the MAIN OUTPUT signal begins to overload.
(22) PHANTOM – Sends 23V of power to the XLR MIC inputs for use with
condenser microphones. When used with batteries, 18 V of power
is supplied.
(23) VU METER – Displays the MAIN OUTPUT signal level.
(24) MON SEND – Adjusts the output at the MON SEND jack.
(25) FX SEND – Adjusts the output at the FX SEND jack.
(26) PHONES – Adjusts the output at the PHONES jack.
(27) MAIN FADER – Adjusts the overall output of the mixer through the
MAIN OUTPUTS. It also aects the signal at the PHONES out and
2-TRACK OUTPUT.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer Xenyx 1002B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer Xenyx 1002B in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer Xenyx 1002B

Behringer Xenyx 1002B Quick start guide - English, German - 13 pages

Behringer Xenyx 1002B User Manual - German - 12 pages

Behringer Xenyx 1002B Quick start guide - French, Portuguese, Spanish - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info