660501
17
Zoom out
Zoom in
Previous page
1/46
Next page
17 X AIR User Manual
5.4 Gate
The Gate tab allows a noise gate to be engaged and adjusted to remove
unwanted noise. To accommodate various levels of mixing expertise, a standard
or advanced screen can be selected. The standard view oers 4 presets and a
threshold adjustment, while the advanced view allows ne adjustment of the
gate parameters.
1. Engage the gate with the on/o button.
2. Adjust the Threshold that the audio must reach in order to bypass the
gate. Any audio that does not register beyond the threshold setting will be
mutedautomatically.
3. Press this button to open the preset list where your settings can be saved
can recalled.
1. Engage the gate with the on/o button.
2. Gate Type buttons allow various types of gates to be selected. The EXP2,
3and 4 settings reduce the output by varying amounts, allowing a natural-
sounding reduction of signals that don’t reach the selected threshold.
TheGate setting enables a more aggressive drop in volume for signals
below the threshold. An additional Range parameter adjusts the amount of
attenuation. The Ducker setting attenuates the signal by a predetermined
amount whenever the signal rises beyond the selected threshold. The Range
parameter adjusts the amount of attenuation for this setting as well.
3. Adjust the Threshold that the audio must reach in order to bypass the gate or
engage the Ducker.
4. The Range parameter adjusts the amount of signal attenuation for the
Gateand Ducker settings.
5. Adjust the Attack knob to set how quickly the gate takes eect when the
input signal drops below the threshold.
6. Adjust the Hold knob to set how long the input signal must surpass the
threshold before bypassing the gate.
7. Adjust the Release knob to set how quickly the gate releases after the audio
rises above the threshold.
8. Engage the Key Filter with the on/o button.
9. Select a high-pass, low-pass or mid peak frequency and slope for the key
lter. The specic frequency can be selected by dragging the line across the
frequency chart.
10. Press the Advanced button to select between normal and advanced
gateoperation.
11. Access the Key Filter parameters by pressing this button.
12. Select a source for the key lter.
5.5 Dynamics
A channels dynamics can be adjusted on this page. A compressor is useful for
reducing the dynamic range of a signal, allowing the perceived volume in the mix
to be raised without clipping. An expander can add dynamics by attenuating a
signal when it drops below the predetermined threshold.
1. Engage the compressor with the on/o button.
2. Adjust the Threshold at which the compressor begins to take eect.
Audiothat falls below this setting will remain unaected.
3. Press this button to open the preset list where your settings can be saved
can recalled.
1. Engage the dynamics processor with the on/o button.
2. Adjust the Threshold at which the compressor begins to take eect.
Audiothat falls below this setting will remain unaected.
3. Adjust the Knee to allow the compressor to have a more gradual eect on
the signal. When the Knee is set fully to the left (hard knee), any signals that
rise above the threshold will receive the full compression ratio right away.
4. Select between a compressor or expander to set the action of the
dynamicsprocessor.
(1)
(2)
(3)
(1)
(8)
(4)(3)
(2)
(9)
(11)
(10)
(5) (6) (7)
(12)
(1)
(2)
(3)
(1)
(2)
(5) (7)(6) (8)
(4) (9)
(11)(3)
(10)
(12) (13)
(14)
(15)
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer XAir - XR16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer XAir - XR16 in the language / languages: English as an attachment in your email.

The manual is 14,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer XAir - XR16

Behringer XAir - XR16 Quick start guide - English, German, French, Portuguese, Spanish - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info