660501
15
Zoom out
Zoom in
Previous page
1/46
Next page
15 X AIR User Manual
4.4 Access Point
This mode only supports DHCP Server operation with a maximum of
4clients, working on Wi channels 1-11. Security is supported via WEP 40-bit
(5ASCIIcharacters) or WEP 104-bit (13 ASCII characters). By default, the mixer
will use a network name consisting of the model name plus the last bits of the
mixers unique MAC address (e.g. XR18-17-BE-C0). The default IP address is
192.168.1.1 and no security is engaged.
The control software is available for Android and iPad tablets as well as Mac/
PC/Linux computers. Visit music-group.com to download the Mac/PC/Linux
software. The tablet software can be downloaded from the application store on
your device.
4.5 Getting Started
First Wi remote connection to your X AIR mixer
1. Download and install the remote control app for your device.
• Android smartphones/tablets: X AIR Android from the
Google Play* store
• iPad: X AIR for iPad from the App Store*
• PC: X AIR EDIT for Windows, Mac or Linux from behringer.com
2. Set the REMOTE switch on your X AIR mixer to ACCESS POINT mode and
power on the mixer.
3. Reset your X AIR mixers network settings to default values by holding
the RESET button for 2 seconds. This is located in the small hole above the
Wiicon and requires a paper clip or similar tool to reach.
4. Switch your remote control device on and open the network settings.
Android smartphones/tablets:
1. Start the Settings/Wireless & Networks dialog on your Android system.
2. Switch ’Wi ’ on.
3. Click on ’Wi ’ to select a network. From the list of networks, select your
X AIR mixers name, e.g. “XR18-19-1B-07”. After a few seconds, the status
should change to ’Connected’.
4. Open your X AIR for Android app and it will show similar information:
• Mix Access = All
• IP Address = 192.168.1.1
• Wi Lock = None
• Wi connected to XR18-19-1B-07
5. You may choose to lock the connection to this specic Wi network if you
want to ensure that your device cannot automatically connect to another
network while you are controlling your mixer.
6. Click on ’Connect’ and tap on the mixers name in order to connect the app
with your mixer. Note - if a warning pops up telling you that the mixer
rmware is not supported, it is recommended to update the rmware to
the latest version (see the product page on behringer.com for details).
Youcan,however, choose to connect anyway.
7. Once the app is connected to your mixer, all parameters will be
loaded automatically. Enjoy exploring all mixing functions of your
XAIRmixerremotely!
iPad:
1. Start the Settings/Wi dialog on your iOS.
2. Switch ’Wi’ on.
3. Select your X AIR mixers name from the list of networks, e.g.
“XR18-19-1B-07”. After a couple of seconds, the status should change to
’Connected’, indicated by a check mark.
4. Open your X AIR for iPad app and it will show any X AIR mixers (’Devices’)
found in that network, with their IP address, which in this case is 192.168.1.1.
5. Tap on the mixer’s icon to connect the app with your mixer. Note - if a
warning pops up telling you that the mixer rmware is not supported,
it is recommended to update the rmware to the latest version (see the
product page on behringer.com for details). You can, however, choose to
connect anyway.
6. Once the app is connected to your mixer, all parameters will be
loadedautomatically. Enjoy exploring all mixing functions of your X AIR
mixer remotely!
PC: X AIR EDIT for Windows, Mac or Linux
1. Open the Wireless Network Connections dialog on your operating system.
2. Make sure the ’WLAN’ or ’Wi ’ adapter is switched on.
3. View the list of wireless networks and select your X AIR mixer’s name,
e.g.“XR18-19-1B-07”. After a couple of seconds, the status should change
to’Connected’, indicated by a check mark.
4. Open your X AIR Editor for Mac/Win/Linux and click on ’Setup’.
Thelistwillshow any X AIR mixers found in that network, with their
nameand IPaddress, which in this case is 192.168.1.1.
5. Click on your mixers name, e.g. “XR18-19-1B-07”, and conrm to
synchronize from mixer to PC in order to connect the app with your mixer.
If a warning pops up telling you that the mixer rmware is not supported,
it is recommended to update the rmware to the latest version (see the
product page on behringer.com for details). You can, however, choose to
connect anyway.
6. Once the app is connected to your mixer, all parameters will be
transferred automatically. Enjoy exploring all mixing functions of your
XAIRmixerremotely!
*App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer XAir - XR16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer XAir - XR16 in the language / languages: English as an attachment in your email.

The manual is 14,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer XAir - XR16

Behringer XAir - XR16 Quick start guide - English, German, French, Portuguese, Spanish - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info