660494
46
Zoom out
Zoom in
Previous page
1/64
Next page
46 X32 RACK DIGITAL MIXER User Manual
7.7 Setup Screen
The setup screen oers various controls for global, high-level functions of
the console such as display adjustments, sample rates and synchronization,
usersettings, and network conguration.
The setup screen contains the following separate tabs:
1. Global: This screen oers adjustments for various global preferences of how
the console operates.
2. Cong: This screen oers adjustments for sample rates and synchronization,
as well as conguring high-level settings for signal path buses.
3. Remote: This screen oers dierent controls for setting up the
console as a control surface for various DAW recording software on a
connectedcomputer.
4. Network: This screen oers dierent controls for attaching the console to a
standard Ethernet network.
5. DCA Groups: This screen oers controls for various aspects of the console’s
DCA groups.
6. Card: This screen selects the input/output congurations of the USB
interface card.
None of the setup screen’s tabs contain a secondary level of encoder functions,
sothe Layer up/down keys do not need to be used for these screens.
7.7.1 Setup Screen: Global Tab:
The setup screen’s global tab allows the user to adjust various global controls of
the console, such as display brightness and contrast, the panning mode used by
channels, text languages, and more.
To make adjustments in the global screen, perform the following steps:
1. Adjust the rst encoder to select various console settings for pop-up
messages and assorted preferences.
2. Tap the 1st encoder to turn the currently selected setting on/o.
3. Adjust the 2nd encoder to select settings for linking multiple consolechannels.
4. Tap the 2nd encoder to turn the currently selected setting on/o.
5. Adjust the 3rd encoder to set the console’s panning mode, which aects how
channel panning is performed in the stereo eld. The two choices are:
• LR + Mono: This is the default mode of the console. In this mode,
channels can be panned between the left and right mix outputs, as well
as assigned to the separate mono mix bus. In this mode, the Center/
Mono bus is not aected by from the pan control.
• LCR enable: In this mode, the signal is panned from Left over Center
to Right. This behavior is emulated by the faders on the Main tab,
abehavior that is more intuitive than on other consoles. Note that in
this mode, the denition of “mono” changes since the setup is no longer
mono, but rather a setup consisting of Left-Center-Right.
6. Adjust the 4th encoder to set the brightness of the various LED lights of the
console, from a range of 1-100.
7. Adjust the 5th encoder to set the brightness of the color screen
(maindisplay), from a range of 1-100. In order to prevent any errors by losing
power during a store operation, we recommend using the “Safe Shutdown”
function by pressing the 5th encoder, then turning the power switch o.
8. Adjust the 6th encoder to set the brightness of the individual LCD screens
(channel display) above each input and output channel, from a range of1-100.
NOTE: The X32 can be locked against unintended use by pressing the 6th encoder
to activate ’Lock Console’. In this state, the UI will not allow any changes to be
made and the display shows “X”. Keep HOME depressed for about 5 seconds to
unlock the X32 again.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer X32 Rack at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X32 Rack in the language / languages: English as an attachment in your email.

The manual is 6,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer X32 Rack

Behringer X32 Rack Quick start guide - English, German, French, Portuguese, Spanish - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info