660494
44
Zoom out
Zoom in
Previous page
1/64
Next page
44 X32 RACK DIGITAL MIXER User Manual
7. 5 Libraries Screen
The libraries screen allows loading and saving of commonly used setups for the
channel inputs, eects processors, and routing scenarios.
The libraries screen contains the following separate tabs:
1. Channel: This tab allows the user to load and save commonly used
combinations of the channel DSP eects.
2. Eects: This tab allows the user to load and save commonly used eects
processor presets.
3. Routing: This tab allows the user to load and save commonly used signal
routings they have set up.
7.5.1 Libraries Screen: Channel Tab
The library screen’s channel tab allows you to load and save commonly used
combinations of the channel DSP eects. For example, once you have dialed in
a combination of equalization and compression that works well for a particular
singer, you can save the channel DSP chain as a preset for later recall.
To adjust the various settings on the channel tab, perform the following steps:
1. Adjust the 1st encoder to navigate among which specic elements of
the input channel can be recalled when loading an input channel preset.
Choicesinclude:
• Head Amp (Microphone Preamplier)
• Conguration
• Gate
• Compressor
• Equalizer
• Sends
2. Tap the 1st encoder to turn the currently selected element on/o in the
recalllist.
3. Adjust the 2nd encoder to scroll among a list of input channel presets.
4. Tap the 2nd encoder to load the currently highlighted preset and make it
active on the currently selected console channel.
5. Adjust the 3rd encoder to scroll among a list of channel preset slots to save
the current state of the currently selected console channel.
6. Tap the 3rd encoder to save the currently selected channels state, to the
currently selected preset slot.
• When the 3rd encoder is tapped, a preset naming screen appears.
Adjustand tap encoders 4-6 to apply a custom name to the preset
before saving it, then tap the 6th encoder to complete the save process.
7. Tap the 4th encoder to delete a preset from the currently highlighted
presetslot.
8. Tap the 5th encoder to import a preset from an attached USB drive.
• When the 5th encoder is tapped, an “import preset from USB”
screenappears. Adjust the 1st encoder to navigate among the contents
of the USB drive, and then tap the 1st encoder to select the currently
highlighted preset folder.
• When the preset le has been imported, tap the 2nd encoder to leave
the screen.
9. Tap the 6th encoder to export the currently highlighted preset to an
attached USB drive.
• When the 6th encoder is tapped, an “Export Preset to
USBdriveappears”.
• Adjust the 1st encoder to scroll among the currently available
presets to export, then tap the rst encoder to select the currently
highlightedpreset.
• Adjust and tap encoders 4-6 to apply a custom name to the preset as it
is exported.
• Tap the 2nd encoder to cancel out of the export operation.
7.5.2 Libraries Screen: Eects Tab
The library screen’s eects tab allows you to load and save presets for the various
onboard eects processors.
To adjust the various settings on the FX tab, perform the following steps:
1. Adjust the 1st encoder to navigate among which of the eight eects slots to
load or save a preset.
• As you navigate among the eight eects slots, the specic eect
processor loaded into each slot will display on the screen as both a name
and icon.
2. To save and load presets, as well as import/export them, follow the same
procedures as detailed in the Libraries Screen: Channel Tab
7.5.3 Libraries Screen: Routing Tab
The library screen’s routing tab allows you to load and save presets of the
consoles signal routings. This can be useful for repeating specic routing
scenarios that occur over and over on a regular basis, such as when using the
console for a weekly club gig or worship service.
To adjust the various settings on the routing tab, perform the following steps:
1. Adjust the 1st encoder to navigate among which specic console signal paths
will be recalled when loading a routing preset. Choices include:
• Channel Inputs
• Analog Out
• Auxiliary Out
• P16 (Ultranet) Out
• Card Out
• AES50 Out
2. Tap the 1st encoder to turn the currently selected element on/o in the
recalllist.
3. To save and load presets, as well as import/export them, follow the same
procedures as detailed in the Libraries Screen: Channel Tab.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer X32 Rack at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X32 Rack in the language / languages: English as an attachment in your email.

The manual is 6,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer X32 Rack

Behringer X32 Rack Quick start guide - English, German, French, Portuguese, Spanish - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info