Manual Behringer X32 Compact (page 53 of 74) (English)

660491

Zoom out

Zoom in

1/74

53 X32 COMPACT DIGITAL MIXER User Manual

7. 5 Setup Screen

The setup screen oers various controls for global, high-level functions of

the console such as display adjustments, sample rates and synchronization,

usersettings, and network conguration.

The setup screen contains the following separate tabs:

1. Global: This screen oers adjustments for console sample rate and

synchronization, as well as initialization options.

2. Cong: This screen oers adjustments for various global preferences of how

the console operates.

3. Remote: This screen oers dierent controls for setting up the

console as a control surface for various DAW recording software on a

connectedcomputer.

4. Network: This screen oers dierent controls for attaching the console to a

standard Ethernet network.

5. DCA Groups: This screen oers controls for various aspects of the console’s

DCA groups.

6. Card: This screen selects between the USB and FireWire connectors, and also

selects the input/output conguration.

None of the setup screen’s tabs contain a secondary level of encoder functions,

sothe Layer up/down keys do not need to be used for these screens.

7.5.1 Setup Screen: Global Tab:

The setup screen’s global tab allows the user to adjust various global controls of

the console, such as display brightness and contrast, sample rate, and the time

and date.

To make adjustments in the global screen, perform the following steps:

1. Adjust the 1st encoder to select from the list of System Controls:

• Shutdown

• Reboot

• Update Firmware

2. Tap the 1st encoder to engage the selected function.

3. Adjust the 2nd encoder to select the sample rate and synchronization.

4. Tap the 2nd encoder to conrm your selection.

5. Adjust the 4th encoder to select an item to initialize.

6. Tap the 4th encoder to initialize your selection.

7. Adjust the 5th encoder to change the currently selected gure for the time

or date.

8. Tap the 5th encoder to scroll through the entries for time and date.

9. Adjust the 6th encoder to change the LCD or LED brightness.

10. Tap the 6th encoder to alternate between LCD and LED brightness.

7.5.2 Setup Screen: Cong Tab:

The setup screen’s cong tab allows adjustment of various audio-related settings,

such as the console’s base sample rate and use of an internal or external digital

clock. It also oers choices for high-level global settings for how signal path

buses operate.

To adjust the various settings of the cong tab, perform the following steps:

1. Adjust the 1st encoder to select between Console, Show Data, and Libraries

for initialization.

2. Tap the 1st encoder to initialize the console back to its factory state.

• An “are you sure” message will appear. Use the left Page Select key to

cancel out of the operation, or the right key to conrm the operation

and initialize the console.

3. The console’s current rmware is displayed in the rst column of the main

color screen.

• If/when a rmware update is available for the console, the user simply

needs to download the new rmware le to the root level of a USB

thumb drive, attach the thumb drive to the console, and then reboot.

The console will see the rmware le and an update will be done

automatically while booting.

4. Adjust the 2nd encoder to select the digital sample rate of the console.

Choices include:

• 48 kHz

• 44.1 kHz

5. Tap the second encoder to assign the currently selected sample rate.

Tip: Note that the sample rate of the console will be the same sample rate for

any audio recorded to the onboard stereo USB recorder, as well as the sample

rate output by the AES/EBU connector that may get patched into an outboard

recorder. Thus, it is often benecial to select a sample rate that is appropriate for

the medium that recorded audio will eventually be used on.

If the program material being recorded is audio only, with no video component,

then it usually makes sense to set a sample rate of 44.1 kHz. This will ensure that

any audio recorded is compatible with the 44.1 kHz sample rate of commercial

audio CDs.

If the program material being recorded is audio that is meant to accompany

video, then it usually makes sense to set a sample rate of 48 kHz. This will ensure

that any audio recorded is compatible with the 48 kHz sample rate of the various

audio formats used on a video DVD.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X32 Compact in the language / languages: English as an attachment in your email.

The manual is 15,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer X32 Compact

Behringer X32 Compact Quick start guide - English, German, French, Portuguese, Spanish - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Behringer X32 Compact Manual

Product: