660491

Behringer X32 Compact Manual

47
Zoom out
Zoom in
Previous page
1/74
Next page
47 X32 COMPACT DIGITAL MIXER User Manual
7. 3 Meters Screen
The meters screen displays dierent groups of level meters for various signal
paths of the console, and is useful for quickly ascertaining if any channels need
level adjustment. Since there are no parameters to adjust for the metering
displays, none of the metering screens contain any “bottom-of-screen”
controlsthat would normally be adjusted by the 6 rotary encoders.
The meter screen contains the following separate screen tabs, each containing
level meters for the following signal paths:
1. Channel:
• Level meters and fader levels for the 32 input channels
• Gate response meters for the 16 input channels
• Gain reduction meters for the 16 input channels
2. Mix Bus:
• Level meters, fader levels, and gain reduction meters for the
16busmasters
• Level meters, fader levels, and gain reduction meters for the
6matrixoutputs
• Level meters, fader levels, and gain reduction meters for the stereo
main bus and the mono bus
3. Aux/FX:
• Level meters for the 6 auxiliary sends
• Level meters and fader levels for the 8 auxiliary returns
• Level meters and fader levels for the 4 stereo eects returns
4. In/Out:
• The 32 input channels
• The 8 auxiliary returns
• The 6 auxiliary sends
• The two rear panel digital outputs
• Monitor outputs
• The 16 rear panel analog outputs
• The P16 Ultranet outputs
5. RTA:
The Real Time Analyzer provides accurate feedback of source frequencies in either
bargraph or spectrograph form, allowing problematic or feedback frequencies to
be quickly identied. The frequency information can be viewed on the dedicated
RTA tab, but can also be overlayed on top of the channel parametric EQ or the
31-band EQ in an FX slot. The 6 encoders allow adjustment for all 3 scenarios.
1. Rotate the rst encoder to cycle through the 6 check boxes to select
various designations. Press the encoder to check the box.
• Channel EQ Defaults
The channel parametric EQ defaults to post-EQ, allowing you to see the
results of your EQ adjustments in real time on the analyzer. Select the
‘Pre EQ’ box to monitor the RTA independent of channel adjustments.
Select the ‘Spectrograph’ box to view in spectrograph form instead of
the default bargraph.
• GEQ Defaults
Per default, the 31-band EQ will display the RTA information at the
bus in which the EQ is inserted (for example, Main LR). Select the
‘Use RTA Source’ box to display the RTA source (see encoder 6). To view
the frequencies as they are adjusted by the EQ, select the ‘Post GEQ’ box.
Select the ‘Spectrograph’ box to view in spectrograph form instead of
the default bargraph.
• RTA Source
When the ‘Solo Priority’ box is selected, the RTA source will be replaced
with the monitor solo bus whenever a channel solo is active. This option
is useful for analyzing a group of channels concurrently, or only briey
analyzing other channels than the xed RTA source. This aects both the
GEQ RTA view and the dedicated RTA tab view.
2. Press the 2nd encoder to view the frequencies on the RTA tab as a
bargraph or spectrograph. Note that this does not aect the channel EQ
or 31-band EQ view. The spectrograph view displays frequencies over a
10 second window, which may make it easier to identify highly dynamic
source material.
3. Press the 4th encoder to enable Auto Gain, which is recommended
for most situations to ensure meaningful readings. However, when
disabled, the gain can be manually adjusted with the encoder which
may be necessary for comparing absolute frequency band levels
between dierent channels.
4. Adjust the 5th encoder to set the EQ overlay transparency of the
analyzer on top of the channel or 31-band EQ. When set to 0%, the RTA
will not be visible on the EQ screens. Press the encoder to set the source
as Pre or Post EQ.
5. Adjust the 6th encoder to select the RTA source. This can be dynamic
if you would like to monitor the currently selected channel or monitor
source, or a xed channel can be selected (for use with a dedicated
measurement mic, for example).
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer X32 Compact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X32 Compact in the language / languages: English as an attachment in your email.

The manual is 15,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer X32 Compact

Behringer X32 Compact Quick start guide - English, German, French, Portuguese, Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info