660489
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
ULTRACOUSTIC ACX450/ACX900/ACX1800
2. CONTROL ELEMENTS AND CONNECTIONS
2.2 Rear panel
ACX450
ACX900
ACX1800
Fig. 2.2: Rear panel connectors
Use the balanced LINE outputs (XLR connections) to
connect your ULTRACOUSTIC to the inputs of a mixing
desk (only in ACX1800 and ACX900).
With the GND LIFT (ground lift) switch you can
disconnect the ground connection between the amplifier
and the mixing desk (switch pressed). This is done to
eliminate buzz or ground loop hum.
You also have the option to take up the audio signal from
the instrument channel at the TUNER output and to feed
it to the tuner. There is a continuous signal at this jack.
Connect the supplied double foot switch to the
FOOT SW(ITCH) jack. The foot switch enables you to
switch the effects of both channels on and off
(corresponds to the function of the IN/OUT switch ).
The CD IN input (RCA) allows for the connection of an
external stereo source. You can for example play your
favourite tune while being accompanied with music from
a CD, MD or a drum machine.
+ MIC INSERT: The microphone channel is equipped
with a serial loop connection for external effects units.
To do this, connect the SEND jack with the input of
your effects unit. Connect the output of the external effects
unit to the RETURN jack
of the ULTRACOUSTIC.
+ INST(RUMENT) INSERT: The instrument channel is
also equipped with a serial loop connection for external
effects units. is the respective SEND connector
(output) and is the respective RETURN connector
(input).
+ The INSERT SEND connector can also be used as
parallel outputs, e.g. to individually feed the signal
of one channel. As long as the RETURN connector
is not used, the internal signal flow is not
interrupted.
Fig. 2.3: Standard IEC power receptacle,
fuse holder and serial number (rear panel)
Power is supplied via an IEC connector. The matching
cable is provided with the unit.
FUSE RETAINER/VOLTAGE SELECTOR: Please make
sure that the voltage indicated by the voltage selector
matches the local voltage before you connect the unit to
the main power supply. Always replace blown fuses with
fuses of the same type and rating. Some units feature a
fuse retainer in which a selection between 230 V and
120 V is possible. Please be aware: When using your unit
outside of Europe with 120 V, a fuse with a higher rating is
required.
SERIAL NUMBER.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer ACX1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer ACX1800 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer ACX1800

Behringer ACX1800 User Manual - German - 11 pages

Behringer ACX1800 User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info