660489
5
Zoom out
Zoom in
Previous page
1/12
Next page
5
ULTRACOUSTIC ACX450/ACX900/ACX1800
The MIC jack is the balanced XLR microphone input of the
microphone/line channel.
The balanced LINE jack (1/4") of the microphone/line
channel can be used for line-level signals, e.g. from
keyboards, drum computers, etc.
The COMPRESSOR controller is used to adjust the
intensity of the compression (only in ACX1800, see
chapter 4.3).
The compressor is switched on/off with the IN/OUT
switch (only in ACX1800).
With the FX SELECT controller, you can select one of
16 effect programs. For a detailed description of the
available effects, see table 4.1 in chapter 4.2.
With the PARAMETER controller (only in ACX1800) you
can edit certain effect parameters. For details on the
parameters that are adjustable for each effect, see
table 4.1.
The IN/OUT switch (not included in ACX450) allows you
to activate the selected effect. If an effect has been
activated, the LED in the switch is on. Alternatively, you
can switch the selected effect on and off with the foot
switch.
The FX LEVEL controller is used to adjust the level (share)
of the selected effect.
With the MASTER controller, you can adjust the overall
volume of the ACX1800.
The PHASE switch reverses the phase of the mix signal
by 180° (only in ACX1800). Use this switch to eliminate
problems with feedback.
The ULTRACOUSTIC is equipped with a CD input at the
rear panel. Use the CD LEVEL controller in the master
section (only in ACX1800) to adjust the volume of the
signal connected to the CD jack. In the ACX900 and
ACX450, this controller is located on the rear panel
(see fig. 2.2).
The CD jack of the ACX1800 can be muted with the MUTE
switch.
Use the POWER switch to switch on the ULTRACOUSTIC.
Before connecting the ULTRACOUSTIC to the power
mains, ensure that the POWER switch is in OFF position.
To disconnect the unit from the mains network, pull the
plug from the socket. When switching on the
ULTRACOUSTIC, ensure that the mains plug is easily
accessible.
+ Please note: The POWER switch does not fully
disconnect the unit from the mains power cord plug
or extention cord. To disconnect the unit from the
main power source, pull out the main cord plug or
appliance coupler. When installing the product,
ensure the plug or appliance coupler is readily
operable. Unplug the power cord when the unit is
not used for a prolonged period of time.
2. CONTROL ELEMENTS AND CONNECTIONS
ACX450
ACX900
ACX1800
Fig. 2.1: The front panel control elements
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer ACX1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer ACX1800 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer ACX1800

Behringer ACX1800 User Manual - German - 11 pages

Behringer ACX1800 User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info