We advise to define precisely the position of the monitor with the user of
the vehicle. 2 positions are possible (see picture) : dashboard or rooftop.
FIXING THE MONITOR & BRACKET
1 • Fix the bracket with the sticker and if possible screw it on the defined position.
2 • Screw the square screw at the back of the monitor on the bracket thanks to
screw wheel 1.
3 • Adjust the height of the monitor and screw firmly the screw wheel 1.
4 • Adjust the angle of the monitor using the screw wheel 2.
CAMERA
POSITION
We advise to define precisely the position of the camera with the user of the vehicle according to the view that should be monitored.
FIXING THE CAMERA
1 • Unscrew the central screws to remove the bracket from the camera housing.
2 • Fix the bracket on the appropriate position on the vehicle
3 • Drill a hole of Ø16 mm to lead through the cable and insert the grommet in this hole. The grommet should be strongly placed in the hole to
ensure the waterproof and avoid rain inside.
4 • Screw the camera on the brakcet thank to the central screws
5 • Adjust the optimal view angle and screw strongly the 4 rotation screws.
Note : the double lense camera of model RWEC200X is already pre-adjusted with the 2 optimal view angles between the 2 cameras. You can dissasembly the 2 cameras if you need
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Beeper RWEC100X-RF at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Beeper RWEC100X-RF in the language / languages: English, French as an attachment in your email.
The manual is 1,17 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
