522415

Beem Power Generator EVO3 Pro-C Manual

23
Zoom out
Zoom in
Previous page
1/56
Next page
BEEM – Elements of Lifestyle
23/56
The iron has not yet reached the
temperature necessary for ironing.
Wait until the temperature control lamp
on the iron no longer flashes.
The steam volume is higher than
necessary.
Set the steam volume as specified in the
table.
The water is too hard or the utensil
has been in use too long without
descaling.
Descale the iron as described in section
8.2.
Limescale
emerges from
the steam
nozzles.
The anti-limescale cartridge is used
up.
Change the anti-limescale cartridge.
All lamps on the
utensil go out.
The utensil has switched off
automatically.
Press the on/off button to switch the
utensil back on.
The steam chamber has not yet
heated up.
Wait until the Heat indicator goes out.
There is not
steam, the
pump indicator
light goes off
when you press
the steam
button.
The steam volume regulator is at off.
Press the button of the steam volume
regulator until one of the three steam
symbols lights up.
The utensil
cannot be
switched on.
Mains plug not plugged in or no
power.
Plug in the mains plug or check the
socket/house fuse.
Fuse blows
Utensil defective or too many devices
connected.
Contact after-sales service or
reduce number of appliances using the
circuit
8. Cleaning
WARNING
Risk of burns
Before cleaning, always remove the plug and allow the utensil to cool
down. Only clean it when it has cooled down fully.
DANGER
Danger of death from electric shock
Never immerse the steam generator in water or other fluids.
CAUTION
Material damage
Never use aggressive or abrasive cleaning agents.
8.1. Cleaning after use
• Place the iron on the rest of the steam generator.
• Remove water reservoir (1) from the steam station and press steam pressure button
(5) until no more steam comes out. Replace the water reservoir.
• Switch the iron and the steam generator off and pull out the plug.
• Rinse out the water tank with clean water.
• Let the utensil cool down (for about 30 minutes).
• Wipe off with a damp, soft cloth.
• Clean all the operating elements and other components also with a soft cloth.
• The sole can be cleaned with a damp cloth. It is best to use a cloth dipped in distilled
water. Then wipe off the sole clean with a dry cloth. Never use scrubbing pads,
vinegar or chemicals.
• Protect the sole of the iron against scratching. Do not iron over metal objects such as
buttons or zip fasteners.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem Power Generator EVO3 Pro-C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem Power Generator EVO3 Pro-C in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info