522390

Beem PANTHER De Luxe Manual

19
Zoom out
Zoom in
Previous page
1/52
Next page
BEEM – Elements of Lifestyle
19/52
6.
Use
6.1 Assembly of meat grinder
Before inserting the plug into the power socket, make sure that the appliance is switched
off.
1. After removing the screw ring (O) insert knife (M) and the desired grinding disk (J, K,
N) into the grinder-housing (C).
2. Please note that the parts must be fitted into the housing in the following order:
worm shaft (L) - knife (M) - disk (J, K, N).
3. The sharp blade of the knife (M) must always face towards the grinding disk (see
figure below).
4. Tighten the screw ring (O) by turning clockwise.
5. Insert the grinder-housing into the motor unit at an angle of 45°.
6. Then turn the grinder housing counter clockwise until it reaches a vertical position
and clicks into place.
7. Fit the tray into the inlet of the grinder housing.
6.2 To use the meat grinder
Switch on the appliance. For pushing food in the grinder housing in order to avoid injuries
always use the pusher. Excessive filling does not speed up the mincing process!
Please note that excess fat has to be trimmed of the meat and the meat has to
be cut into cubes before putting into the grinder housing.
6.3 Hints for usage
The motor is protected against overload by a temperature-controlled cutoff switch and
switches off automatically if overloaded. In this case let cool down the appliance for
about 60 minutes.
NOTE: If overloading has occured, turn off the appliance and unplug. Check the
cause of disturbance and eliminate it. After 60 minutes plug in again. The
appliance is ready for use.
The reverse button (G) is to be used if the worm shaft gets stuck, because of unproperly
minced meat. In this case push the reverse button for about 2-3 seconds, just to allow
the worm shaft to free itself. Remove the meat that has blocked the mincing process.
The appliance is now ready for further use.
Note: the reverse button must only be used for max. 10 seconds otherwise the
motor will be damaged. In this case the manufacturer assumes no liability.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem PANTHER De Luxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem PANTHER De Luxe in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info