712825

Beem 03840 - Robustica Manual

33
Zoom out
Zoom in
Previous page
1/86
Next page
29 EN
9. To remove coffee, carefully press a glass or a coffee mug against the coffee dispenser (6).
After the preset duration of the keep-warm function has expired, the device automatically
switches to stand-by mode. The operating lamp in the START / STOPP (start / stop) button
goes out.
Warming Up Coffee
To warm coffee up again, press theSTART / STOPP (start / stop) button (16) and hold it
down for approx. 3 seconds. The preset time for the keep-warm function is activated again and
the coffee is reheated (see the “Handling and Operation” chapter – “Keep-Warm Function”).
Making Iced Coffee
1. Prepare the coffee machine, add coffee powder, pour in water, insert a fi lter and if neces-
sary set the brew strength and the keep-warm function (see the previous chapter). When
you do this, make sure that the tank is fi lled for no more than 6 cups!
The coffee needs to be brewed stronger for iced coffee. We recommend two heaped
measuring spoons for each 125 ml cup.
2. Fill the coffee tank (2) up to the 10-cup mark on the fi ll-level indicator with ice cubes.
3. Set the keep-warm function to the 0 setting using the WARMHALTEN (keep warm)
button (12) (see the “Handling and Operation” chapter – “Keep-Warm Function”).
Making Coffee with a Preset Time
1. Prepare the coffee machine, add coffee powder, pour in water, insert a fi lter and if
necessary set the brew strength and the keep-warm function (see the previous chapter).
2. Hold down the TIMER button (11). The time display 19:99 fl ashes on the display (10).
3. Use the buttons S (14) and M (13) to set the start time you want (see the “Handling and
Operation” chapter – “Time”).
4. Let go of the TIMER button.
5. To activate the preset time, press the TIMER button again. A beep sounds, the operating
lamp in the button lights up and START TIMER appears on the display. The preset time is
activated.
Once the preset time is reached, the device switches on automatically. The operating lamp in the
TIMER button goes out and the operating lamp in the START / STOPP (start / stop) button(16)
lights up.
Deactivating the Preset Time
To deactivate the preset time setting again, press the TIMER button (11). The operating lamp
in the button goes out and the programming is deactivated. However, the preset time is saved
until a new time is programmed in or the device has been disconnected from the power supply.
03840_DE-EN-FR-ES-IT_Inlay_A5_V3.indb 2903840_DE-EN-FR-ES-IT_Inlay_A5_V3.indb 29 16.01.2019 09:44:2216.01.2019 09:44:22
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem 03840 - Robustica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem 03840 - Robustica in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info