703102
25
Zoom out
Zoom in
Previous page
1/92
Next page
27 EN
Switch off the device and pull the mains plug out of the plug socket if an error occurs during
operation, when there is a power cut or before a thunderstorm.
Never pull or carry the device by the mains cable. When you pull it out of the plug socket,
always pull on the mains plug and never the mains cable!
Protect the device from other heat sources, naked ames, sub-zero temperatures, persis-
tent moisture, wet conditions and impacts.
Use only original spare parts from the manufacturer.
Before Initial Use
NOTICES
There may still be some production residues on the device. To avoid harmful effects
to your health, clean the device before you rst use it (see the “Cleaning and Care”
chapter).
1. Remove all packaging materials and any possible protective lms used for protection during
transportation. Never remove the rating plate and any possible warnings!
2. Wipe the device with a clean, damp cloth.
Rinse the glass jug (6), the lter insert(16) and
the permanent lter (17) as well as the measuring spoon (10) with a little mild detergent
and clear water.
3. Set up and connect the device (see “Setting Up and Connecting the Device” chapter).
4. Before you enjoy your rst coffee, we recommend that you carry out a trial run with coffee
beans to remove any possible production residues in the water system and in the grinder
shaft (14). To do this, follow the instructions in the “Preparation” chapter.
When the device is rst used, production-related additives (e. g. grease) may cause
a small amount of smoke and / or an odour to be produced. This is normal and not a
device defect.
5. Repeat this process twice. Do not drink this coffee!
6. Clean the device and accessories (see the “Cleaning and Care” chapter).
Setting Up and Connecting the Device
NOTICES
Only connect the device to a socket with safety contacts that is properly installed and
matches the technical data of the device. The socket must also be readily accessible
after connection so that the connection to the mains can quickly be isolated.
Do not use the device in conjunction with extension cables.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem 02041 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem 02041 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info