703102
24
Zoom out
Zoom in
Previous page
1/92
Next page
EN 26
Be careful when removing the lter insert after operating the device. There may still be
hot water remaining in / on the lter insert or permanent lter! Always allow the lter
insert and the permanent lter to cool down rst before they are removed / cleaned.
Never pour water into the water tank when the device is switched on or during the
brewing process. Allow the device to cool down before lling it again.
Do not move the device during the brewing process.
The coffee which is prepared is hot! Be careful when handling hot liquids.
Keep items of clothing such as scarves, shawls, jewellery, ties and long hair away from the
coffee bean compartment and the grinder shaft.
Do not reach into the coffee bean compartment and the grinder shaft and do not insert
any objects when the device is in operation!
Make sure that the connected mains cable does not present a trip hazard. The mains cable
must not hang down from the surface on which the device is placed in order to prevent the
device from being pulled down.
WARNING – Danger of Fire
Do not use the device in rooms containing easily ignitable dust or poisonous and explosive
fumes.
Do not connect the device along with other consumers (with a high wattage) to a multiple
socket in order to prevent overloading and a possible short circuit ( re).
Do not operate the device in the vicinity of combustible material. Do not place any com-
bustible materials (e.g. cardboard, paper, wood or plastic) in or on the device.
Do not cover the device during operation.
In the event of a re: Do not extinguish with water! Smother the ames with a reproof
blanket or a suitable re extinguisher.
NOTICE Risk of Damage to Material and Property
The device should only be used if it has been correctly assembled! Before each use, check
whether the lter insert and the permanent lter are inserted correctly and whether the
water tank is lled correctly!
Only connect the device to a socket with safety contacts that is properly installed and
matches the technical data of the device. The socket must also be readily accessible after
connection so that the connection to the mains can quickly be isolated.
Lay the mains cable in such a way that it does not become squashed or bent and does not
come into contact with hot surfaces (also applies to the hot surfaces of the device!).
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem 02041 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem 02041 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info