589600
12
Zoom out
Zoom in
Previous page
1/15
Next page
12
TROUBLE SHOOTING
1. If the power indicator is off and the laser doesn't work, please check the power supply and the input.
2. In Stand-Alone operation, if the power supply indicator is ON and sound active indicator is OFF, but
the laser doesn't work.
A. The sound may be too small and cannot activate the laser running, please increase the music
volume or increase sound sensitivity on rear panel.
B. Please check if unit has been set up in slave mode, or DMX mode.
3. In Master-Slave operation, slave units don't running, please check as below.
A. Make sure there's only one master in the chain, and the others are set in slave mode.
B. Make sure to use a good quality power cable and XLR connector.
4. In DMX operation, the unit can’t be controlled by the DMX console, but the DMX signal indicator is
flashing, please make sure the DMX console and unit have the same channel.
After trying the above solution you still cannot sort out the problem, please contact your dealer or our
company for service.
TECHNICAL SPECIFICATION
Pango 1250
Pango 2500
Ref.nr:
152.982
152.979
Laser Green
200mW @532nm
400mW @532nm
Laser Red
300mW @635nm
600mW @637nm
Laser Blue
750mW @447nm
1500mW @447nm
Guaranteed laser power
1000mW
2000mW
Max. laser power
1250mW
2500mW
Scanner system
30K high speed optical
scanner
40K high speed optical
scanner
Class
4
4
Modes
Sound Active, Auto run,
DMX512 (12 CH),
Master/slave mode, ILDA
Sound Active, Auto run,
DMX512 (12 CH),
Master/slave mode, ILDA
Interface
3 pins XLR jack for DMX or
Maser-Slave linking, DB25
ILDA interface for PC
3 pins XLR jack for DMX or
Maser-Slave linking, DB25
ILDA interface for PC
Function
DMX, Auto, Sound active
and Master-Slave
DMX, Auto, Sound active
and Master-Slave
Rated voltage
AC110240V 50/60Hz
AC110240V 50/60Hz
Fuse
T3A
T5A
Rated power
80W
150W
Weight (per unit)
4.8Kg
8.3Kg
Dimensions per unit
218 x 235 x 172 mm
255 x 281 x 206 mm
The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ PANGO 2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ PANGO 2500 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info