589600

BeamZ PANGO 2500 Manual

11
Zoom out
Zoom in
Previous page
1/15
Next page
11
DMX SETTING
Channel
Function
Value
Description
1
Laser OFF
000-041
Laser OFF
Auto Activate
042-083
DMX mode, CH2-CH12 valid
084-125
Build in animation graphics auto running mode
126-167
Build in beam graphics auto running mode
Sound Activate
168-209
Build in beam graphics auto running mode
210-251
Build in animation graphics auto running mode
252-255
DMX mode, CH2-CH12 valid
2
Pattern select
000-255
Selecting built-in patterns
3
Rotation
000-127
Manual rotation
128-191
Auto counter-clockwise rotation (from slow to fast)
192-255
Auto clockwise rotation (from slow to fast)
4
X-axis rolling
000-127
Manual rolling
128-255
Auto rolling (from slow to fast)
5
Y-axis rolling
000-127
Manual rolling
128-255
Auto rolling (from slow to fast)
6
X-axis moving
000-127
Manual choose moving position
128-255
Auto moving (from slow to fast)
7
Y-axis moving
000-127
Manual choose moving position
128-255
Auto moving (from slow to fast)
8
Pattern size
000-063
Choose pattern size, 0 is normal size, 1 is the smallest, 63 is the
biggest.
Zooming
064-127
Auto zooming (-) from slow to fast
128-191
Auto zooming (+) from slow to fast
192-255
Manual zooming (+/-) from slow to fast
9
Drawing
000-255
Auto drawing from slow to fast
10
Scanning speed
000-127
Auto drawing from slow to fast
Display dot
128-255
Choose the length of dot
11
Color setting
000-024
Normal color
025-199
Choose every single color
200-224
Every single color changing one by one
225-255
All the colors together changing alternatively in one pattern
12
Color change speed
000-255
Adjust color changing speed from slow to fast
DMX-512 CONNECTION
If you are using a standard DMX controller, you can connect the DMX output of the controller directly to the
DMX input of the first unit in a DMX chain. If you wish to connect a DMX controller with other XLR outputs
you will need to use adapter cables.
1 = Shield
2 = Signal (-)
3 = Signal (+)
Connect the DMX output of the first unit in a DMX chain with the DMX input of the next unit in the chain.
Always connect the output of one unit with the input of the next unit until all units are connected. If you use a
controller with 5 pin DMX connection you will need to use a 5 pin to 3 pin adapter.
Caution at the unit, the DMX cable has to be terminated with a terminator. Solder a 120 Ohm
resistor between Signal (-) and Signal (+) into a 3-pin XLR connector and plug this into the
DMX output of the last unit in the chain.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ PANGO 2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ PANGO 2500 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info