506088
7
Zoom out
Zoom in
Previous page
1/11
Next page
17. Add/kill button: Press to select add of kill mode. In kill mode the indicator is lit. In add mode the flash button
levels are isolated from other levels. In kill mode and when flash button levels are turned on, the other levels are
set to zero.
18a. Programm button: Press this button for more than one second to enter programm mode. When in program
mode, the indicator is lit. Now 30 variable patterns (1 – 30) are ready to be programmed, each containing 99
step max. Press this button to store your setting as one step. The display shows the next step to be
programmed.
18b. Shift + end step button: In programm mode pressing shift + end step sets the present step as the last step.
19a. Assign button: Press this button for more than one second to enter assign mode. When in assign mode the
indicator is lit. In assign mode, press assign button first, then press flash button to store the present level as
assign.
19b. Shift + delete programm button: In programm mode press shift + delete program together to delete present
pattern.
20a. Patch button: Press this button for more than one second to enter or leave patch mode. In patch mode the
display shows the level with the left two digits and shows the DMX channel number with the right two digits.
When the left two digits show 00, the DMX channel level is 0. If it shows FF the DMX channel is maximum. If it
shows 01 – 16, the DMX level is 1 to 16 channel level. In midi channel mode, this button is invalid.
20b. Shift + midi channel button: Press shift + midi channel button together for more than one second to enter of
leave midi channel mode. In midi channel mode press step or step button to select desired channel. The
display shows CH:XX. Midi channel lapse if the indicator close to Patch button is lit.
21. Full on button: Press to make 1 – 8 channels full intensity and stand by is not effective.
22. Shift button: This button is only used with other function button.
23a. Loop button: In chase mode press this button to enter loop chase mode and define present patterns as the 1st
pattern run by loop. The display shows XX:LP. Press this button again to add the pattern (showing XX) to the
patterns run by loop. Up to 100 patterns can by loop. If more than 100 patterns the display shows XX:FL. If the
loop button is not pressed within 10 seconds the display shows XX:CL (XX is the present pattern). Press the
loop button, the display shows XX:LP, now the patterns are ready to be added to the patterns run by loop.
23b. Shift + loop exit button: Press shift + loop exit together to leave loop chase mode.
24a. Chase button: Press to enter auto chase mode. The matching point in de display is lit. In this mode te chasing
speed is controlled by the speed knob and the pattern in controlled by the level knob.
24b. Shift + audio button: Press shift + audio together to enter audio chase mode. The matching point in the display
is lit.
25a. Tap sync button: In chase mode press this button to enter tap sync chase mode. The matching point in the
display is lit. In this mode the interval of the last two pressings on the tap sync button is set to step time. (single
pressing is invalid). To leave this mode turn the speed knob to enter auto chase mode.
25b. Shift + manual step button: Press shift + manual step together to enter manual chase mode. The matching point
in the display is lit. In this mode press step or step button to execute the patterns.
26a. Stand by button: Press to enter of leave stand by mode. IN stand by mode the indicator close to this button is f
lashing. Channel fader, latch button and the master level generate by present pattern are turned off. Flash
button level remains.
26b. Shift + manual button: Press shift + manual button together to enter manual mode. The matching point in the
display is lit and the display shows the master fader with 000 - 100
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ DMX 016 Channel Console at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ DMX 016 Channel Console in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info