506088
6
Zoom out
Zoom in
Previous page
1/11
Next page
CONTROLS
Front
1. Channel indicators
2. Channel fader: Controls the level in assign programm mode or the channels in manual mode
3. Latch button (CH 9 – CH 16): It functions as assign latch or channel latch in manual mode
4. Flash button (CH 1 – CH 16): It functions as assign flash or channel flash in manual mode
Shift + flash button: Changes the blind setting in chase mode and when blind enable indicator is lit
5. Master fader: This fader functions as a master fader for fader 1 – 8 or in chase mode and cross function as
master for the pattern. The patterns are executed step by step by moving the master fader
6. M indicator: Indicating the master status for fader 1 – 8
7. A & B indicators: Indicating the master status of two following steps in cross mode
8. Level knob: This knob functions as a master for the pattern in chase mode
9. Speed/Fade time know: This knob controls the chasing speed from 10 steps/sec to 1 step/5min and time from
0.1sec to 5min in chase mode.
10. Audio knob: This knob controls the sensitivity in audio chase mode
11. Display: It shows the present operating mode and program options
12. Cross button: This button enters or leaves cross mode in chase mode and when cross on indicator is lit
13a. Pattern button: Press to increase the left two digits by one. Pressing this button for more than one second
increases the digits quickly from present counter till the maximum and then increase from the minimum to
maximum etc.
13b. Shift + Button setup: Pressing shift + button setup together sets the channel fader. Latch button and flash
button, each press makes a new setting, the matching indicator is lit.
14a. Pattern button: Press to decrease the left two digits by one. Pressing this button for more than one second
decreases the digits quickly from present counter till the maximum and then increase from the minimum to
maximum etc.
14b. Shift + Fade time setup: Pressing shift + fade time setup sets the fade time. When fade time indicator is not lit,
fade time is disabled. If step time indicator is lit, fade time is set by the speed knob and is identical to the step
time.
15a. Step button: Press to increase the right two digits by one. Pressing this button for more than one second
decreases the digits quickly from present counter till the maximum and then increase from the minimum to
maximum etc. In chase mode, press this button to execute the pattern by one step. Pressing for more than one
second allows to execute the pattern by ten steps per second.
15b. Shift + cross setup button: Pressing shift + cross setup together enables or disables cross mode. If cross off
indicator is lit, press the cross butoon to enter or leave cross mode.
16a. Step button: Press to decrease the right two digits by one. Pressing this button for more than one second
decreases the digits quickly from present counter till the maximum and then increase from the minimum to
maximum etc. In chase mode, press this button to execute the pattern by one step. Pressing for more than one
second allows to execute the pattern by ten steps per second.
16b. Shift + blind button: Pressing shift + blind together enables or disables blind mode. In blind mode the enable
indicator is lit.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ DMX 016 Channel Console at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ DMX 016 Channel Console in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info