765482

BeamZ 160.563 - SNOW 1800 Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
- 6 -
Remote Level Control
Connect the remote control to the connector on the back of the fogger. After warm-up, the LED will light up to indicate
that the machine is ready for use. Use the switch to turn on / turn off the fog machine pump and use the dial to adjust
the output volume from 0 ~ 100%.
DMX control (DIP)
Connect the device directly to a DMX controller or a DMX loop with multiple DMX effects. The machine has a 3-pin
XLR connector for DMX connection.
Address not selectable, address is always 1.
Note:
It is necessary always lock a DMX loop with a 120 Ohm terminator for correct data transmission.
CHANNEL
FUNCTION
1
0 – 100%
Snowlevel
2
0 – 100%
Airlevel (Ch1 must be on)
Timer remote control
Connect the remote control to the connector on the back of the fogger.
After some warm-up time, the device is ready for use, the LED will light up on the remote. During use, it may happen
that the machine stops, in this case the LED will go out, indicating that the machine is warming up.
Timer function:
Press the yellow button and set the interval, duration and volume controls to the desired level.
Interval: time between the smoke moments (10-200 seconds)
Volume: amount of smoke (0-100%)
Duration: duration of the smoking time
Continuous function:
Press the red button and set the volume to the desired level. The machine will continuously produce an amount of
smoke. It may be that the machine in between have to warm up, during this period no smoke is produced. How many
times this is done depends on the amount of smoke.
Manual Mode:
Press the green button to produce 100% smoke immediately; this button overrides all previous settings.
Specification
Power supply ................................................. 220-240VAC, 50Hz
Tank capacity ................................................................ 3.1 litres
Dimensions ................................................... 470 x 255 x 270mm
Weight ................................................................................ 7.3kg
Accessories
Snow fluid, high quality on water basis, specially designed for the Beamz snow machine. Is used undiluted and
guarantees trouble-free operation. 1 litre pack, Ref no. 160.578 .
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would
also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or
disrespect of the warnings contained in this manual. Tronios BV cannot be held responsible for personal injuries caused by a
disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 160.563 - SNOW 1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 160.563 - SNOW 1800 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info