765482

BeamZ 160.563 - SNOW 1800 Manual

5
Zoom out
Zoom in
Previous page
1/12
Next page
- 5 -
EN
Congratulations to the purchase of this Beamz snow machine. Please read this manual carefully prior to using the
unit.
WARNING
- Read the instruction manual thoroughly prior to using the unit.
- Keep this manual for future reference.
- Keep the packaging so that the unit can be shipped in the original packaging in order to avoid damage.
- For indoor use only.
- Make sure that there is sufficient cooling in the mounting area.
- Never plug or unplug the unit with wet hands.
- If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains outlet.
- Keep away from heat and direct sunlight. Make sure that neither liquids, nor small objects can enter the unit
through the ventilation holes.
- Only clean the unit with a damp, dust free cloth. Do not use cleaners or solvents!
- Do not use contact spray or cleaning agent to clean the switches and pot meters.
- Repairs have to be carried out by a qualified technician only.
- Only connect this unit to an earthed mains outlet of 230Vac/50Hz and 10-16A.
- Always unplug the unit during a thunderstorm or when it is not in use.
- When you unplug the unit from the mains always pull the plug, never the lead.
- The unit does not contain any user replaceable parts other than those specified in this manual.
- When you unplug the unit from the mains always pull the plug, never the lead.
- In order to prevent dropping of the unit, a safety fastening needs to be installed. This can be a solid chain, a
steel cable, etc. which has to be fastened separately from the mounting bracket.
- The supplied bracket is the main fixing and must be used to solidly mount the light effect.
- In order to avoid accidents in public premises, the local legal requirements and safety regulations/warnings
must be fulfilled.
- Keep out of the reach of children.
Intro: This high-performance 1800W snowmachine creates a winter nature during any party. The artificial snowflakes
whirl meters away and provide a nice atmosphere and an extra dimension in e.g. an après-ski atmosphere. Supplied
with remote control.
Safety Recommendations:
Always connect the snow machine to a wall outlet or an earthed mains lead!
Be careful when filling the tank. Unplug the unit from the mains first! Open the tank and fill it by means of a suitable
funnel.
Only use Beamz snow fluid. This fluid is environmental friendly, biodegradable and, if properly used, leaves no
residues (please see as stated below).
Do not obstruct the openings on top of the housing in order to ensure a proper cooling. Do not place any objects on
the snow machine.
Installation and use:
Unpack the unit. Fill the tank via a funnel and plug the unit into a mains outlet. Switch the compressor motor on by
pressing the button on the remote control. The snow machine produces immediately a nice flow of artificial snow at a
distance of about 6m.
Location:
Place the snow machine at a location where it can be easily filled. The machine can also be hung via the supplied
adjustable bracket.
Switching off:
Switch the unit off by unplugging it from the mains.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 160.563 - SNOW 1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 160.563 - SNOW 1800 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info