For longer operation and to save battery energy, you can automatically switch off OLED display after no operation has taken place for a certain period of
time.
Set your display battery saver:
Press button,
Select and confirm with button,
Select and confirm with button,
Select and select “ON”, “OFF” or “LOGO” with button,
Select and confirm with button,
Select your time between 3 till 255 seconds with or button and confirm with button.
Ready? Go back to the “main” menu with button.
When used in public spaces, unauthorized persons can consciously or unconsciously change the lighting settings. This is usually undesirable and you can
therefore set a password.
Set your password:
Press button,
Select and confirm with button,
Select and select “ON” or “OFF” with button,
Select and confirm with button,
Fill in the standard password , , , .
Now you can create your own password with , , or buttons.
Ready? Go back to the “main” menu with button.
When fabricating your own cables, always observe the illustrations on this page. Never connect the shielding of the cable to the ground contact of the plug,
and always make certain that the shielding does not come into contact with the aluminium or metal housing of the plug. If the shielding is connected to the
ground, this can lead to short-circuiting and system malfunctions.
The product is maintenance-free, except for incidental cleaning. For cleaning you can use a lint-free, damp cloth. Refer repairs to an authorised Beamz
specialist.
