5.0 SCENE PROGRAMMING (STEPS)
5.1 INSERT A SCENE
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired CHASE button.
3) Press the TAPSYNC/DISPLAY to switch the LED
display to steps view.
4) Use the BANK UP/DOWN buttons to navigate steps and
locate the insert point of the new scene. The display will
read the step number.
5) Press MIDI/ADD button to prepare the insert.
6) Use the BANK UP/DOWN button to locate the SCENE.
7) Press the SCENE button that corresponds to the scene
to be inserted.
8) Press MIDI/ADD button to insert the scene. All LEDs will
blink.
Note: To insert a scene between Steps 05 and 06 navigate
using BANK buttons until the display reads STEP05.
5.2 COPY A SCENE
1) Press and hold the PROGRAM button to enter
programming mode.
2) Select the BANK that contains the scene to be copied
using the BANK UP/DOWN buttons.
3) Press the SCENE button that corresponds to the scene
to be copied.
4) Press MIDI/ADD button to copy the scene.
5) Select the BANK destination that contains the scene
memory to record onto using the BANK UP/DOWN
buttons.
6) Press the desired SCENE button to complete copy. All
LEDs will blink.
5.3 DELETE A SCENE
1) Press and hold the PROGRAM button to enter
programming mode.
2) Select the BANK that contains the scene to be deleted
by using the BANK UP/DOWN buttons.
3) Press and hold the AUTO DEL button.
4) Press the SCENE button that corresponds to the scene
you want to delete. All LEDs will blink.
Note: When deleting a scene the physical location is not
removed, however, all 384 DMX channels available
to the scene will be set to value 0.
5.4 DELETE ALL SCENES
1 Press and hold the PROGRAM button and the BANK
DOWN button while turning off power to the controller.
2) Turn the controller back on.
Note: CAUTION! This process is irreversible. All scenes
with data will be set to 0.
PLAYBACK
6.0 RUNNING IN SOUND-MODE
1 Press the MUSIC BANK COPY button until the turns on.
2) Select the BANK program to run in sound active mode
using the BANK UP/DOWN buttons.
3) Alternatively you can press a single CHASE button (1~6)
or several CHASE buttons in sequence and all selected
chases will loop in the order selected.
4) You can adjust the duration time using the FADE TIME
fader.
Note: In the Sound mode, programs will be triggered by the
sound using its built-in microphone. Multiple chases
selected will loop and run in the order originally selected.
6.1 RUNNING IN AUTO-MODE
1) Press the AUTO DEL button until the AUTO LED turns
on.
2) If a CHASE button is not pressed the controller will
automatically run a program.
3) Change BANK programs by using BANK UP/DOWN
buttons.
4) Alternatively you can press a single CHASE button (1~6)
or several CHASE buttons in sequence and all selected
chases will loop in the order selected.
5) You can adjust the time between steps by moving the
SPEED fader and the duration of the step by moving the
FADE TIME fader.
Note: In the Auto mode, programs will be triggered by
controllers fade and speed time as set on the faders.
Multiple chases selected will loop and run in the order
originally selected.
