765602

BeamZ 154.048 - DMX384 Manual

8
Zoom out
Zoom in
Previous page
1/32
Next page
8
4.4 EDIT CHASE (COPY BANK INTO CHASE)
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired CHASE button.
3) Select the BANK to be copied using the BANK
UP/DOWN buttons.
4) Press MUSIC/BANK COPY button to prepare copy.
5) Press MIDI/ADD button to copy the bank. All LEDs will
blink.
4.5 EDIT CHASE (COPY SCENE INTO CHASE)
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired CHASE button.
3) Select the BANK that contains the scene to be copied
using the BANK UP/DOWN buttons
4) Press the SCENE button that corresponds to the scene
to be copied.
5) Press MIDI/ADD button to copy the scene. All LEDs will
blink.
4.6 EDIT CHASE (INSERT SCENE INTO A CHASE)
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired CHASE button.
3) Press the TAPSYNC DISPLAY to switch the LED
display to steps view.
4) Use the BANK UP/DOWN buttons to navigate steps and
locate the insert point of the new scene. The display will
read the step number.
5) Press MIDI/ADD button to prepare the insert.
6) Use the BANK UP/DOWN button to locate the SCENE.
7) Press the SCENE button that corresponds to the scene
to be inserted.
8) Press MIDI/ADD button to insert the scene. All LEDs will
blink.
Notes: To insert a scene between Steps 05 and 06
navigate using BANK buttons until the display reads
STEP05.
4.7 DELETE A SCENE IN A CHASE
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired CHASE button that contains the scene
to be deleted.
3) Press the TAPSYNC/DISPLAY button to switch the LED
display to steps.
4) Select the scene/step to be deleted using the BANK
UP/DOWN buttons.
5) Press AUTO DEL button to delete the step/scene. All
LEDs will blink.
4.8 DELETE A CHASE
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the CHASE button (1~6) to be deleted.
3) Press and hold AUTO DEL button and the respective
button to delete the chase. All LEDs will blink.
4.9 DELETE ALL CHASE PROGRAMS
CAUTION! This procedure will result in irrevocable loss of chase step memory. The individual scenes and program banks will
be preserved.
1) Turn OFF controller.
2) Press and hold the BANK DOWN button and the AUTO
DEL button while turning ON the controller.
3) All LEDs will blink
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 154.048 - DMX384 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 154.048 - DMX384 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info