766343

BeamZ 151.200 Manual

4
Zoom out
Zoom in
Previous page
1/24
Next page
4
CONTROLLER
MENU
Use to access the menu or return a previous menu option.
UP
Navigates upwards through the menu list and increases the value when in a
function.
DOWN
Navigates downwards through the menu list and decreases the value when
in a function.
ENTER
Used to select and store the current menu or confirm the current function
value or option within a menu
DMX-512 CONNECTION
If you are using a standard DMX controller, you can connect the DMX output of the controller directly to the DMX input of the
first unit in a DMX chain. Always connect the output of one unit with the input of the next unit until all units are connected.
If you use a controller with 5 pin DMX connection you will need to use a 5-pin to 3-pin adapter.
At the last fixture, the DMX cable has to be terminated. Solder a 120 Ohm resistor between signal (-) and signal
(+) into a 3-pin XLR connector and plug this into the DMX output of the last fixture in the chain.
DMX ADDRESSING
The controller of this LED curtain use 8 DMX channels. To ensure that the control signals are properly directed to each device,
the device requires addressing. This is to be adjusted for every single device by changing the DMX starting address via the
control board.
The DMX starting address is defined as the first channel from which the device will respond to the controller. Please make sure
that you do not have any overlapping DMX channels in order to control each device correctly and independently. If several units
are defined on one DMX address, they will work synchronously.
DMX SETTING
Channel Function
V
alue Descri
p
tion
1 Master Dimmer 000-255 Dimming 0-100%
2 LED Red or ¼ cool white 000-255 Dimming 0-100%
3 LED Green or ¼ cool white 000-255 Dimming 0-100%
4 LED Blue or ¼ cool white 000-255 Dimming 0-100%
5 LED White or ¼ cool white 000-255 Dimming 0-100%
6 Strobe 000-003 No strobe
004-255 Strobe (slow-fast)
7 Mode
000-050 Manual control CH1-6
051-200 Auto mode
201-255 Sound mode
8 Speed 000-255 Auto mode speed
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 151.200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 151.200 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info