766342
6
Zoom out
Zoom in
Previous page
1/52
Next page
6
TILT - Tilt Inversion
1. Press the MENU button until “TILT” is displayed, press ENTER. Either “Yes” or “No”
will be displayed.
2. To activate the tilt inversion press the UP or DOWN buttons until “Yes” is displayed,
press ENTER to confirm. To deactivate tilt inversion, select “No” and press Enter
LED - With this function you can have the LED display turn off after 10
seconds.
1. Press the MENU button until “LED” is displayed, press ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or DOWN buttons to select
“ON” to keep the LED display on at all times, or “OFF” to switch to have the LED display
switch off after 10 seconds.
DISP - This function will reverse the display 180º.
1. Press the MENU button until “DISP” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it again.
3. To make you LED display reappear again press any button
TEST - This function will run a self-test program.
1. Press the MENU button until “TEST” is displayed, press ENTER.
2. The fixture will now run a self-test.
FHRS - With this function you can display the running time of the unit.
1. Press the MENU button until “FHRS” is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press MENU to exit.
VER - Use this function to display the Software version of the unit.
1. Press the either the MENU button until “VER” is displayed, press ENTER.
2. The display will show the software version.
RSET - This function will reset the unit.
1. Press the MENU button until “RSET” is displayed. Press the ENTER button and the unit will reset itself.
OFFSET SUBMENU
Menu
To enter the Offset Menu, press the ENTER button for at least 3 seconds. In this submenu you are able to adjust the home
positions of the tilt motor positions.
Tilt Offset - Adjustment of the tilt home position for any of the 2 bars.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that either “Til 1” or “Til 2” is
displayed, and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the MENU button for
one second to exit.
ENTER
MODE UP
DOWN
ENTER
MODE UP
DOWN
ENTER
MODE UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeamZ 150.303 - MHL820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeamZ 150.303 - MHL820 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info