304945
23
Zoom out
Zoom in
Previous page
1/36
Next page
o The washing machine is overloaded.
9 Clean the pump filter.
9 Reduce the wash load.
o No water in the washing machine.
9 Make sure the water tap that the
machine is connected to is turned on
fully.
9 Clean the mesh filter that sits in the
inlet hose.
o The water was not pumped out.
9 Clean the drain pump filter.
9 Check the drain hose is not blocked
or kinked.
23
ning.
le.
o The appliance has recognised a
foam surplus, therefore the wash
cycle completes without spin
9 To get the soap suds out of the
clothes, the rinses and conditioning
program should be selected. Do not
put any detergent in the machine
for this wash cyc
Once the machine has been plugged back into your mains power
supply, to clear the fault code from the LCD display, you should turn
on the machine and hold down the Start/Stop button for approximately
5 seconds.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic bfw1001w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic bfw1001w in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info