332009
16
Zoom out
Zoom in
Previous page
1/19
Next page
Electrical Connection
This appliance must be installed by a competent person, such as one holding NICEIC Registration and
in accordance with the latest edition of the IEE WIRING Regulations.
Before connecting the appliance, make sure that the supply voltage marked on the rating Plate
corresponds with the mains supply voltage.
WARNING – THIS APPLIANCE MUST BE EARTHED
Depending on the power input of the model to be installed, connection will require a 30 Amp protected
supply using a switched double pole isolating unit having a minimum 3mm contact separation and a
BS6007 3 core cable.
Care must be taken to avoid the cable being in contact with hot parts of the appliance. The isolating
unit should be placed in an easily accessible position adjacent to the appliance.
The mains terminal block is located on the underside of the hob and the terminals are accessible by
removing the terminal block cover by removing the cover screw. The mains supply connection cable
type should be H05 RR-F <HR> marked or above.
Before connecting the appliance to the mains supply the installer must check that the voltage stated on
the appliance rating plate (located on the underside of the hob) is exactly the same as the mains voltage
supply.
Mains cable entry point
Brass Link
Brass Link
Earth
N
N
L3
L2
L1
The cable connections must be in accordance with the diagram located on the bottom of the hob the
brass links must be positioned as marked in the appropriate diagram and once established ALL
terminal screws must be tightened down firmly.
NOTE
The appliance must NOT be connected to the mains supply by means of a 13A plug and
socket.
SERVICING
During the guarantee period, all service intervention should be referred back to the
Baumatic Ltd Service department. Please note that intervention or repair by
any unauthorized personnel will invalidate such guarantee.
15
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic b13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic b13 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info