332009
14
Zoom out
Zoom in
Previous page
1/19
Next page
Installation Instructions
This appliance must be installed by a competent person in accordance with the current version of the
following UK regulations and safety standards or their European normal replacements.
Building Regulations (Issued by the Department of the Environment).
Building Standards (Issued by the Scottish Development Department).
IEE Wiring Regulation
Electricity at Work Regulations
Baumatic Ltd Installation Instructions
Positioning The Appliance
This appliance is classified as Class 3 and therefore is to be built into a kitchen unit (depending on size)
or 600mm worktop, providing the following minimum distances are allowed
- 650mm between the top surface and the underside of any horizontal surface above it.
- 50mm clearance around the appliance and any combustible materials.
The surface of any adjacent units must be capable of withstanding a minimum temperature rise of 85°C
Installation Notes
1. Cut the aperture to the dimensions shown in the table on page 14 of these instructions or use the
template provided on the packaging.
2. Invert the hob and apply the sealing agent provided to match the outer perimeter edge.
3. If the sealing agent is a strip type, the protective covering must be removed from both sides.
Do not leave a gap in the sealing agent or overlap the thickness.
NOTE: do not use any Silicone based sealant, as this can damage the worktop surface if
repairs are required.
4. Insert the appliance into the aperture and fix into position via the clamps & screws, tightening
The screws evenly (see Fig.3).
Spring Plate location points, Slide spring clip
into place making sure the hole in the plate
lines up with the hole on the underside of the
hob, fixing bracket screw will now locate in
the hole to secure the hob unit to the
underside of the work surface.
Terminal Block
Under side of hob
13
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baumatic b13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baumatic b13 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info