305996
8
Zoom out
Zoom in
Previous page
1/14
Next page
Troubleshooting Guide
This washing machine is
equipped with automatic
safety functions which detect
and diagnose faults at an early
stage and react appropriately.
Often, however, the faults
detected are small enough to be
solved in a matter of minutes.
For example:
The appliance will not
start; no lamp lights up.
Check whether:
the appliance is plugged in;
the wall socket is
functioning correctly (use a
table lamp or similar to test);
a programme is selected
correctly.
The appliance will not
start, but the “Start/
Pause” lamp is flashing.
Check whether:
the appliance door is
properly closed (child lock);
the programme has been
changed;
the water tap is turned on. If
not, turn the tap on and press
the
“Start/Pause”
button.
The appliance stops
during the programme.
Check whether:
the
“Rinse Hold”
lamp is
on. Terminate this option by
pressing the button again;
another programme has
been selected.
Reselect the desired
programme and press the
“Start/Pause”
button;
“Start/Pause”
lamp goes
on. Press
“Start/Pause”
button;
The appliance safety system
has been activated.
See fault description table.
Detergent and additives
incorrectly washed in.
Check whether:
the detergent dispenser
inserts are incorrectly
located (see “Care and
Maintenance”);
enough water is being
supplied. The mesh filters in
the water connection could
be blocked (see “Care and
Maintenance”).
The appliance vibrates
during the spin cycle.
Check whether:
the appliance is levelled and
solidly installed on all four
feet (see “Installation”);
the transit bolts have been
removed. Before using the
washing machine you must
remove the transit bolts (see
“Installation”).
Detergent dispenser
1.
Press the release lever in the prewash compartment down and
pull out the dispenser.
2.
Remove the inserts from the detergent dispenser.
3.
Clean all parts under running water.
4.
Replace the separate parts in the detergent dispenser and
slide the dispenser back into the opening.
Periodically check and clean the mesh filters in the
water connection.
1.
Turn off the tap.
2.
Unscrew the water inlet hose from the tap.
3.
Clean the internal filter.
4.
Screw the supply hose back onto the tap.
5.
Unscrew the supply hose from the washing machine.
6.
Clean the mesh filter in the washing machine.
7.
Screw the supply hose back on to the machine.
8.
Turn on the tap and ensure that the connections are water-
tight.
4gb15150.fm Page 8 Monday, July 8, 2002 7:00 PM
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht wab 8795 big at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht wab 8795 big in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht wab 8795 big

Bauknecht wab 8795 big User Manual - German - 14 pages

Bauknecht wab 8795 big User Manual - Dutch - 14 pages

Bauknecht wab 8795 big User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info