806856
21
Zoom out
Zoom in
Previous page
1/56
Next page
EN - 21
The original packages and foamed polystyrene (PS) can be retained if required.
During transportation, the appliance should be secured with a wide string or a strong rope. The
instructions written on the corrugated box must be followed while transporting.
Before transporting or changing the installation position, all the moving objects (ie,shelves,crisper...)
should be taken out or xed with bands in order to prevent them from getting damaged.
Carry your fridge in the upright position.
Repositioning the door
It is not possible to change the opening direction of your fridge door, if the door handles on your
fridge are installed from the front surface of the door.
It is possible to change the opening direction of the door on models without any handles.
If the door opening direction of your fridge may be changed, you should contact the nearest Authori-
sed Service to have the opening direction changed.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
If your refrigerator is not operating as expected, check the solutions listed below before calling an
electrician or the after sales service.
What to do if your refrigerator does not operate:
Check that :
Your fridge is plugged in and switched on,
The fuse is not blown and there is not a power cut,
The thermostat setting is in the on « • » position,
The socket is no longer functioning. To check this, plug in an appliance that you know is working
into the same socket.
What to do if your refrigerator performs poorly:
Check that:
You have not overloaded the appliance,
The doors are fully closed,
There is no dust on the condenser,
There is enough space for air circulation at the rear and side of the appliance.
If your fridge is operating too loudly
Normal Noises
Cracking (Ice cracking) Noise: (For no frost/frost free appliances)
During automatic defrosting. When the appliance is cooled or warmed (due to expansion of
appliance material).
Short cracking: Heard when the thermostat switches the compressor on/off.-
Compressor noise
Normal motor noise: This noise means that the compressor operates normally
The compressor may cause more noise for a short time when it is rst activated.
Bubbling noise and splash:
This noise is caused by the ow of the fridge freezer in the tubes of the system.
If your fridge is operating too loudly
To maintain the set cooling level, compressor may be activated from time to time. Noises from your
fridge at this time are normal and due to its function. When the required cooling level is reached,
noises will be decreased automatically.
If the noises persist;
If you will not use your fridge for a long time (e.g. in summer holidays), put the thermostat to “•” • Is
your appliance stable? Are the legs adjusted?
Is there anything behind your fridge?
Are the shelves or dishes on the shelves vibrating? Re-place the shelves and/or dishes
BEFORE CALLING SERVICE
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht KR 195 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht KR 195 A in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info