806856
19
Zoom out
Zoom in
Previous page
1/56
Next page
EN - 19
Wait at least two hours, after the installation, before connecting the appliance to the power supply.
Connect the appliance to the power supply and turn the thermostat knob to switch on the appliance.
After turning the appliance on, you must wait for 4-6 hours for the correct storage temperature to be
reached for a normally lled appliance.
Your fridge may have a smell when it is operated for the rst time. This is normal and the smell will
fade away when your fridge starts to cool.
FIRST TIME USE
Thermostat setting
Larders (coolers) have not any freezer compartment but can cool below 5°C.
Thermostat automatically regulates the inside temperature of the refrigerator compartment.
By rotating the knob from position 1. to 5., colder temperatures
can be obtained.
« • » position shows thermostat is closed and no cooling is
available.
For short-term storage of food in the freezer/refrigerator
compartment, you can set the knob between minimum and
medium position.(1-3)
For long-term storage of food, you can set knob to medium position.(3-4)
Temperature Settings Warnings
Larders (coolers) have not any freezer compartment but can cool up to 4 - 6 °C.
The ambient temperature, temperature of the freshly stored food and how often the door is opened
affects the temperature in the fridge. If required, change the temperature setting
It is not recommended that you operate your fridge in environments colder than 10°C in terms of its
efciency.
When setting the thermostat, take into consideration how often the appliance door is opened and
closed, how much food is stored in the refrigerator, and the environment in which the refrigerator is
located.
When the appliance is rst switched on, allow it to run for 24 hours in order to reach large quantity of
food inside. operating temperature. During this time, do not open the door and do not keep a large
quantity of food inside.
Unplug your appliance during a power cut to prevent damage to the compressor. Once power is
restored, delay plugging in your appliance for 5 to 10 minutes. This will help prevent damage to the
appliance’s components.
Your appliance is designed to operate in the ambient temperature ranges stated in the standards,
according to the climate class stated in the information label. It is not recommended that your fridge
is operated in the environments which are outside of the
stated temperature ranges. This will reduce the cooling
efciency of the appliance.
This appliance is designed for use at an ambient
temperature within the 10°C - 43°C range.
USAGE INFORMATION
Climatic Class Amb. T. (°C)
SN: From 10 to 32 °C
ST: From 16 to 38 °C;
N: From 16 to 32 °C
T: From 16 to 43 °C
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht KR 195 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht KR 195 A in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info