806779
19
Zoom out
Zoom in
Previous page
1/84
Next page
.FAST PREHEATING
Turn the selection knob to the symbol to select the
fast preheating function and confirm by pressing the
selection/confirmation button: the settings are shown
on the display. If the proposed temperature is that
desired, press the selection/confirmation button. To
change the temperature, proceed as described in
previous paragraphs.
PRE
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature.
At this point, open the door, place the food in the
oven, close the door and start cooking.
At the end of preheating, the oven automatically
selects the conventional function: If you wish to set
a different cooking function, turn the selection knob
and select the desired function.
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result. Opening the door during the preheating phase will
stop pause it.
The cooking time does not include a preheating phase.
You can always change the temperature you want the oven
to reach using the adjustment knob.
5. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
Press the selection/confirmation button to continue
cooking in manual mode (without a programmed
cooking time) or turn the adjustment knob to extend
the cooking time by setting a new duration.
BROWNING
Some functions of the oven enable you to brown
the surface of the food by activating the grill once
cooking is complete.
PRESS
When the display shows the relevant message, if
required press the selection/confirmation button to
start a five-minute browning cycle.
You can stop the function at any time by turning the
selection knob to to switch the oven off.
. TIMER
When the oven is switched off, the display can be
used as a timer. To activate this function, make sure
that the oven is switched off and turn the adjustment
knob: The icon will flash on the display.
Turn the adjustment knob to set the length of time
you require and then press the selection/confirmation
button to activate the timer. An audible signal will
sound and the display will indicate once the timer has
finished counting down the selected time.
Please note: The timer does not activate any of the cooking
cycles. Use the adjustment knob to change the time set on
the timer; turn the selection knob to to switch the timer
off at any time.
COOKTOP OPERATION
(see the instructions supplied with the cooktop).
The oven control panel features 4 adjustable knobs
for cooktop operation.
The cooktop control knobs are marked with a
numerical scale corresponding to different power
settings, and a series of function symbols.
Please note: The multizone function can only be switched on
for the double and triple hotplates of the cooktop.
Turn the control knob of the relevant hotplate
clockwise to the desired power setting.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht HIS3 EP8V2 IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht HIS3 EP8V2 IN in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 73.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info