When a program, additional options or Delay is chosen, press button and close the door within 3 seconds to start chosen program.
The list of available programs and options can be found in program table on next page. To switch on
the appliance, press .
Press button to choose program in accordance with the level of soiling of the dishes and with
Program table. Information will be shown on the display:
Active additional options
Selected program indication
Short program description and program duration, program progress
To pause the program (e.g. if you want to insert an item):
-Press button or open the door with caution (the program pauses) and insert the items,
(beware of HOT steam!).
-Press button and close the door within 3 sec. to restart the cycle (
the program resumes
the cycle from where it was interrupted
).
PAUSE
ȝȝȝțȘȘȘȘȘȘȘȣ3:15
PRESS fflst
ȝȝȝțȘȘȘȘȘȘȘȣ3:15
To cancel or change the program in progress:
-Press button for 3 seconds to cancel the program on running (water is drained for up to 1 minute, then the appliance switches off).
-A short press of button will wake up the unit.
-Select a new program pressing button.
-Press the button and close the door.
During program running time, the progress of the program is shown on the display (as bar) as well as phase of program, and time to the end of the program:
MAIN WASH
ȝȝȝȝȜȘȘȘȘȘȘȣ1:50
According to the cycles, the display may provide additional information:
-SENSOR - with animation (on bar) - sensor is adjusting time and energy and water
consumption to the level of soil amount on the dishes. Present only in Sensor program.
-MAIN WASH - main washing.
-HOT RINSE/RINSE - rinsing phase of program.
-ACTIVE DRY - drying using PowerDry® technology.
-STATIC DRY - drying phase of program.
-CALIBRATING - appliance is calibrating its sensor.
After the program is complete, the display shows:
END OF CYCLE
ȝȝȝȝȝȝȝȝȝȝȝ0:00
On the display additional information can be shown:
-REFILL RINSE AID - refill rinse aid.
-REFILL SALT- refill salt reservoir.
-CHECK FILTER - clean filters when needed.
After 30 seconds the appliance switches off.
Open appliance door (beware of hot steam!) and unload the racks, starting from the lower rack first.
If it is needed to refill salt reservoir or rinse aid dispenser, it is recommended to do this operations right before start of the next cycle.
G
PowerClean® uses special water jets to provide an intensive wash for shallow dishes and pans loaded centrally to the PowerClean® area.
1.Adjust the PowerClean® area G folding down rear plate holders to
load pots.
2.Load pots and casseroles inclined vertically in PowerClean® area. Pots
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bauknecht GSXP X384A3 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bauknecht GSXP X384A3 in the language / languages: English as an attachment in your email.
The manual is 9,77 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
