LEDs ensure excellent illumination, have a service life up to 10 times longer than traditional bulbs, and oer up to 90%
energy savings.
To replace a lamp, proceed as follows:
1. Remove the grease lters.
2. Access the lamps from inside the hood.
3. Press the release clips to release the lamp.
4. Remove the lamp from the hood frame.
5. Disconnect the terminal.
Proceed in reverse order to t the replacement lamp.
NB: To purchase an LED lamp, please contact the Technical After-sales Service Centre.
MATERIALS SUPPLIED
Remove all the components from the packages. Check that all the components are included.
• Assembled hood with motor, bulbs and grease lters tted (1 or 2 grease lters depending on the model).
• Installation and operating instructions
• 1 x mounting template
• 1 x Torx T10 adapter
• 1 x Torx T20 adapter
• 1 x deector
• 5 x wall plugs, dia. 8 mm
• 5 x screws dia. 5x45
• 3 x screws dia. 3.5x9.5
• 1 x washer dia. 5.3x2
• 1 x cable clamp
• Power cable
• 2 x deectors
• 1 x telescopic chimney section
• 1 x chimney support bracket
INSTALLATION – PRELIMINARY FITTING INSTRUCTIONS
The hood is designed for installation in "lter mode".
Filter mode
The air is ltered as it passes through one or more carbon lters and is recycled back into the atmosphere.
IMPORTANT: Check that the air recirculation process runs smoothly.
If the hood does not have the carbon lter(s), order one/them and t before use.
The hood must be tted away from very dirty areas, windows, doors and sources of heat.
The hood comes with all the materials necessary for installation on the majority of walls/ceilings. However, a qualied technician must ensure that the materials are
suitable for the type of wall/ceiling in question.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bauknecht DBHVS82 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bauknecht DBHVS82 in the language / languages: English as an attachment in your email.
The manual is 3,12 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
