73028
4
Zoom out
Zoom in
Previous page
1/15
Next page
GB
Follow the instructions on the display
Display
Remove the protective film, if present,
from the display.
Once the desired settings
appears on the display, confirm
by pressing the “OK” button to
proceed to the next step in
programming.
Press the cancel selection
button “<<” to cancel the
set operation and return to
the previous screen.
The “-/+” Browse knob has
different uses, depending on the
selected function:
• For browsing through the
menus and the submenus
• For increasing/reducing the
indicated values
• For browsing through the
cooking functions
For increasing/reducing the
cooking time and temperature.
The Function knob is used to select the various oven functions. Each click
of the knob corresponds to a function:
Turn the Function Selection
knob (
F
) three clicks
anticlockwise.
The following message appears
on the display “SETTINGS”.
Steam
Pastry
Maxi-Cooking
F
-/+
Steam Clean
Settings
Special
If the message “Bauknecht” appears on the display and the oven starts
in demo mode, the compartment heating elements are deactivated. To
exit the Demo mode and restore normal oven operation, proceed as
follows:
1. Disconnect the oven from the power supply and reconnect it
within 60 seconds:
2. Turn the Function knob (F) to “Rapid heat”
3. Press the Cancel Selection button “<<”,
4. Turn the Function knob (F) to “0”,
5. Press the “OK” button”.
N.B:
in demo mode, in steam ovens, cleaning functions are active.
To use the cleaning functions, follow the procedure described in the
steam sheet, using water instead of vinegar.
Child Safety with control panel lock
To activate or deactivate the “Child Safety Lock”:
Press the “<<” and “OK” buttons at the same time for at least 5
seconds.
If activated, the knobs and the buttons are locked and the display
shows the symbol
N.B: This function can also be activated during cooking
AUTO OFF device
For safety reasons, the oven switches off automatically (except for the
Special function) after 4.5 hours of continuous operation.
Request for confirmation when the settings are changed
By turning the Function knob back to its original position the display
will show the settings of the cooking cycle in progress. In any case, the
oven continues the cooking cycle until the user confirms the change in
settings. If the Function knob is turned during a cooking cycle, the oven
requests confirmation of this choice in order to avoid accidental
changes to the cooking settings.
Stand-by
To save energy, the display can be deactivated (display in OFF mode)
by pressing the Cancel Selection button “<<” with the Function knob
turned to “0”. To reactivate the display, press the button “<<” again
with the Function knob turned to “0”.
To change a language that has been set mistakenly, proceed as follows:
1. Turn the Function knob to “SETTINGS”, select “Language” with
the “+/-” Browse knob and confirm by pressing the “OK” button”.
2. Reselect the required language with the “+/-” Browse knob and
confirm by pressing the “OK” button.
Description of the control panel
Demo mode
Safety Features
SETTINGS
Turn the Function knob (F) three clicks anticlockwise. The message
“SETTINGS” appears”
Use the “+/-” Browse knob to modify the values.
The following can be set in sequence:
LANGUAGE (Available languages: ENGLISH (factory-settings),
Reset brightness and
contrast settings.
To restore the
brightness and
contrast factory
settings:
Turn the Function
knob (F) to “0”.
Turn the Function
knob (F) to
“SETTINGS”.
Keep the “OK
button pressed for 5
seconds.
In this way the
factory-settings will
be restored.
ENGLISH*
DEUTSCH
FRANCAIS
NEDERLANDS
$llo.y
OK
Restoring a language
Using the appliance for the first time
When switching the oven on for the first time,
settings of the following values is requested
Set the required values with the “+/-” Browse
knob and confirm the selection by pressing the
“OK” button”.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht BLZS 7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht BLZS 7200 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht BLZS 7200

Bauknecht BLZS 7200 User Manual - German - 15 pages

Bauknecht BLZS 7200 User Manual - Dutch - 6 pages

Bauknecht BLZS 7200 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info